An agency founder who reads your review of white-label email platforms and then leaves hasn't gone cold. They're comparing. The retargeting campaigns SaaS affiliate partners can run at a profit give that founder something on the second visit that the first visit didn't, and that thing is proof. With SendTo, the proof is a page showing the sending, domain warmup and address checks their agency will never have to build. Send that same warm visitor straight to an affiliate link and you've paid twice for a click that skips the part that persuades.
Two habits stop the budget leaking. First, every audience stays inside the programme's 90-day first-touch attribution window, so you never pay to re-reach someone whose referral can no longer count. Second, the timing. This is written in the week of 27 November 2025, which is Black Friday week, when consumer retailers bid ad prices up. Keep spend light now and scale into January, when agency owners plan their year and interest in email marketing peaks. Small budgets win on timing and proof. Frequency and commission talk don't do it.
Below you'll find seven steps, each with the action, what you should see and the mistake to avoid, followed by a way to check whether any of it produced referrals.
By the end you will have a retargeting setup that brings agency founders back to proof, and you need five things before you start
Here's what you'll have built once the steps are done. You'll have consent-safe tags on your site, three audiences built from intent signals rather than raw visits, and one ad set where every ad carries a single proof point. Behind those ads sits a bridge page, there's a segment of your email list that gets the same treatment for free, and you'll have a simple way to measure the lot against actual referrals.
It's worth being clear about what the programme pays, because the whole setup is shaped around it. A SendTo affiliate earns 20% of the platform fee, the partner subscription, that each referred agency pays SendTo, every month that agency keeps paying it. You never earn a share of what the agency's own customers pay the agency. Attribution lasts 90 days from the first click, the first touch wins, and commission is paid monthly by PayPal.
Before you start, check you have these five things.
- A site, newsletter or content library that already gets agency-owner traffic. Retargeting multiplies interest you've earned. It can't create any.
- An approved SendTo affiliate link, with the terms read (Step 1 covers what to check).
- A cookie consent tool that can block scripts until a visitor accepts, and that supports Google consent mode.
- Ad accounts on Meta Ads, LinkedIn Ads and Google Ads, with billing set up. You won't use all three hard, but you'll want to test each.
- UTM parameters on every link you control, so the bridge-page visits, outbound clicks and referrals can be matched later.
Step 1: Read the programme's promotion rules before you spend anything on ads
Paid promotion is where affiliate terms get strict. A programme that's happy for you to write reviews and send newsletters can still forbid bidding on its brand name, ban ads that link straight to an affiliate URL, or limit the claims you make in ad copy. Read the terms for three things. Which paid channels are allowed. Whether you can bid on the brand name or close misspellings of it. And whether ads have to land on your own page rather than on the tracked link.
What you should see: a short list, written down, of the channels you're cleared to use, the keywords you must avoid and the claims you're allowed to make. If anything is unclear, ask the programme in writing before the first pound goes out. Our guide to the programme terms creators should check covers the clauses that catch people out.
The mistake: assuming retargeting is allowed because content promotion is. They're different activities. One is you recommending a tool. The other is you buying ad space with the brand's name near it, and programmes treat the two separately.
Step 2: Install the Meta Pixel, LinkedIn Insight Tag and Google tag behind consent, not around it
Yes, you need consent before the pixel fires. In the UK, PECR and UK GDPR require it for non-essential cookies and trackers, and the EU's ePrivacy rules and GDPR say the same. Advertising tags are non-essential by any reading. So the Meta Pixel, the LinkedIn Insight Tag and the Google tag should load only after a visitor accepts marketing cookies in your consent tool.
In practice you register each tag inside your consent tool, or inside Google Tag Manager with consent checks switched on, and set it to fire on the marketing consent category. For Google, turn on consent mode so the Google tag respects the visitor's choice for ad storage and ad personalisation. Remove any hard-coded copy of the pixel from your theme, because a second copy sitting in the page header will fire regardless of what your banner says.
What you should see: open your site in a private window and decline cookies. Meta's Test Events view in Events Manager should show nothing, Google Tag Assistant should show the Google tag waiting on consent, and the LinkedIn Insight Tag shouldn't load. Accept, refresh, and all three should fire.
The mistake: tags firing on page load. That breaks UK and EU cookie rules, and it fills your audiences with people you can't lawfully target. That's a list you'd have to throw away if anyone asked how it was built.
Step 3: Build audiences around intent signals, because a general visitor list wastes most of the budget
Someone who read one blog post about subject lines isn't shopping for a white-label platform. Someone who spent four minutes on your platform comparison is. Build audiences from what visitors did, not from the fact that they arrived. Here are the three that matter.
- Visitors to your comparison, pricing-explainer or review pages in the last 30 days. These people are choosing a tool now.
- Visitors who scrolled most of the way through your deliverability content, or watched most of a demo video. Set this up with a scroll-depth event in Google Tag Manager and with video-view audiences on Meta and LinkedIn.
- Email subscribers who clicked an agency-platform link in your newsletter but didn't sign up. Upload them as a customer list, but only where your privacy notice covers this use.
Cap every window at 90 days or less. The reason is the attribution rule. If a founder first clicked your affiliate link 95 days ago, their referral can no longer be credited to you, so every impression you buy them after that is spent on someone else's commission or on nobody's. A 30-day window for the comparison audience, 60 for deep readers and 90 for email clickers keeps the spend on people who can still count.
Pick the platform by how you'll reach founders, not by habit
LinkedIn is the most precise of the three, because you can layer job titles such as founder or managing director and company sizes onto your retargeting list. It's also the most expensive per click, so use it for the comparison audience, where intent is highest. Meta is cheaper and good at re-reaching people who've already shown interest, because it's matching people you already know rather than finding new ones. Google Ads display and YouTube work well for video viewers. Start with all three on small budgets and let a month of data choose.
What you should see: three audiences in each ad account, each with a window of 90 days or less and a size that's growing slowly every week.
The mistake: one big all-visitors audience on a 180-day window. It looks large and cheap. In practice it spends on readers who were never buying, and on people whose attribution expired months ago.
Step 4: Write each ad around one deliverability proof point, not around features or commission
A founder who's visited once has already seen the overview. What they want now is a reason to believe the platform will take work off their hands. Give each ad one proof point, taken only from what SendTo actually does, and send it to a page that shows that proof in detail. One ad, one proof.
- Addresses are verified before sending, so a client's dusty list doesn't damage the agency's reputation on day one.
- New sending domains get automated warmup, and dispatch speed is controlled per provider and per domain.
- Campaign volume is spread across several brand-matched sending domains, so no single domain carries the whole load. Our piece on multi-domain distribution explains why that matters for agencies sending big volumes.
- Reports leave out security-scanner opens, so clients see human opens and clicks. Here's more on real human open rates.
- An AI reviewer checks subject lines, links, structure and basic compliance before each campaign launches.
- The agency runs it all through a branded portal under its own name, at prices it sets itself.
Write the ad in the founder's words. "Warmup on every new client domain, done for you" lands better than "advanced deliverability infrastructure". Show the thing where you can, such as a screenshot of a report with scanner opens filtered out, or the portal carrying an agency's own logo. Keep plan prices out of the ads altogether, because they change and your ads won't. If a reader wants costs, the bridge page sends them to SendTo's pricing page.
What you should see: three to six ads, each with a single claim you can point to inside the product, and each with a UTM tag naming its proof point so you can tell later which one earned the clicks.
The mistake: ads that list eight features, or that pitch the commission. A founder doesn't care what you earn, and a feature list asks them to do the sorting you were meant to do for them.
Step 5: Send ad clicks to your own bridge page so the second visit does the persuading
The ad gets the founder back to you. The bridge page has to win them over. Build one page per proof point, so the warmup ad lands on a warmup page and the branded-portal ad lands on a resale page. A founder who clicked because of a claim should see that claim proven straight away, not have to dig for it on a homepage.
Each bridge page needs four parts. First, a short demo or walkthrough of under three minutes that shows the proof inside the product, such as a new domain going through warmup or a report with scanner opens filtered out. Our guide to video walkthroughs that sell white label software covers how to record one. Second, a list of what the agency stops building. Third, a plain answer to the resale question. Fourth, your affiliate link, carrying a UTM tag for that page.
The list of what they stop building does most of the work, because it turns features into hours saved. Keep it to the jobs SendTo actually does for them.
- Address verification before every send, so a client's old list gets checked before it costs the agency its reputation.
- Warmup for each new client sending domain, with dispatch speed controlled per provider and per domain.
- Spreading volume across brand-matched sending domains.
- Filtering security-scanner opens out of client reports.
- A pre-launch review of subject lines, links, structure and basic compliance.
- A branded client portal, plus billing.
The resale answer is short. The agency runs SendTo under its own brand, sets its own prices for its clients, and clients pay for their own usage on top of the monthly subscription the agency sets. Leave SendTo's own plan prices off the page and link to the pricing page instead, so your page never shows an out-of-date figure.
Why the bridge page matters more under first-touch attribution
First touch wins for 90 days. If a founder clicked your affiliate link three weeks ago and comes back through your ad, the credit is already yours, and the ad's only job is to help them decide before the clock runs out. If they first clicked another affiliate's link, your ad won't change who gets the credit. So retargeting can't win you credit. It only helps a lead you already own make up their mind. A page that convinces does that. A redirect straight to the affiliate link doesn't.
What you should see: in your analytics, ad visits to each bridge page and outbound clicks on its affiliate link, split by UTM, so you can see which proof page sends the most founders onward.
The mistake: a bridge page that repeats the ad and then pushes the link, or one that talks about commission. A founder can tell a pre-sell page from a useful one in seconds.

Step 6: Set frequency caps and a budget that waits out Black Friday week, then scale in January
A small test teaches you more than you'd expect. Around £10 to £15 a day per platform is enough to see which proof point gets clicks, as long as your audiences have passed the minimum sizes from Step 2. Start there and resist raising it until a full fortnight of data is in.
Cap frequency at two or three views per person per week. A founder who sees the same warmup ad nine times in five days doesn't trust it more. They mute it. Meta and LinkedIn only offer hard caps on reach-style objectives, so on other objectives watch the frequency column and pause or swap creative when it climbs past three. Google Ads display and YouTube let you set frequency management on the campaign itself.
Then there's the calendar. This week is Black Friday week, with Black Friday on 28 November and Cyber Monday on 1 December, and consumer retailers are bidding ad prices up across Meta and Google. Your founder audience isn't any more ready to buy because a sofa brand is outbidding you. Keep spend light through Cyber Monday. December interest in email marketing is high, so let audiences keep growing and run modest spend there. Then scale in January, when agency owners set their budgets for the year and interest peaks. Expect June to be the quietest month and budget down for it.
What you should see: cost per click holding steady week to week, frequency staying under your cap, and audience sizes growing.
The mistake: doubling the budget this week because traffic looks busy, or turning everything off and losing the audience build-up you'll need in January.
Step 7: Run the free half of retargeting through your own email list
Your list is retargeting you've already paid for. For retargeting campaigns SaaS affiliate partners run, it's usually the cheapest channel in the setup, because a subscriber who clicked an agency-platform link last month is warmer than anyone in your paid audiences.
Split subscribers by what they did with your last few campaigns, then send each group a different proof-led follow-up that links to the matching bridge page. If your newsletter runs on a platform that builds segments from past campaign clicks, unclicked opens and non-openers, as SendTo does, this takes minutes.
- Clicked: send the bridge page for the proof they clicked on, plus a second proof that supports it, such as verification alongside warmup.
- Opened but didn't click: try a different proof point with a plain subject line. The first one didn't land, so don't repeat it.
- Didn't open: one resend with a new subject, then stop. Two more emails to people who haven't opened won't get you anything except complaints.
For the timing and wording of each follow-up, our piece on automated email follow-up sequences for B2B affiliate offers sets out a sequence you can copy.
What you should see: a clearly higher bridge-page click rate from clickers than from non-openers. If the two are close, your segments aren't separating real intent and need rebuilding.
The mistake: sending one identical email to all three groups and calling it segmentation.
Check it worked by matching bridge-page clicks to referrals over 90 days, and fix the weakest link if it did not
One week of data tells you almost nothing. A founder who clicks your link in early December can sign up in late February and still count. So line up three numbers across the full 90-day window. Bridge-page visits by UTM source, outbound clicks on the affiliate link from each page, and referrals in your SendTo affiliate dashboard. If your analytics shows the outbound clicks but the dashboard shows no referrals after the window closes, the leak is after your page, not before it.
Treat view-through conversions from Meta, LinkedIn and Google Ads with caution. They count anyone who saw an ad and later did something, which includes founders who'd have signed up anyway. To see what retargeting really adds, hold one audience back from ads for a month, such as half your email clickers, and compare their referral rate with the half who saw ads. It's rough, but it's honest.
| What you see | Weak link | Fix |
|---|---|---|
| Impressions but almost no clicks | The proof point or the creative | Swap to a different proof point, or show it working in a screenshot |
| Ad clicks but no affiliate clicks | The bridge page | Shorten it, put the demo first, answer the resale question higher up |
| Affiliate clicks but no referrals after 90 days | Audience intent or fit | Narrow to comparison-page visitors and email clickers, drop broad readers |
| Costs climbing, clicks flat | Frequency or timing | Lower the cap, refresh creative, hold spend until January |
| Audiences too small to serve | Consent rate or window | Lengthen windows up to 90 days, add email clickers as a list |
If you only do two things this week, check your tags fire only after consent and build the 30-day comparison audience, while spend stays low. In January, put the money behind the proof pages that earned the most clicks in December. Don't tell founders what you earn. Show them the sending, warmup and address checks they'll never have to build, and let them decide inside the 90-day window. The programme pays 20% of the partner subscription each referred agency pays SendTo, every month it pays, paid monthly by PayPal.
Get your affiliate link approved now, so your tags, audiences and bridge pages are ready before January.
Join the SendTo affiliate programme


