A new client signs on Monday and wants their spring offer in front of 8,000 contacts by Friday. The domain they'll send from was registered last week. Automated domain warmup for new sending accounts handles the slow, boring part of that job. It raises volume a little each day, paces sends per mailbox provider and spreads the load across domains, so nobody on your team has to babysit a spreadsheet of daily limits. It doesn't guarantee the inbox. No warmup does, automated or manual.
The agencies that reach the inbox for new clients let the automation run the ramp untouched. They spend their own hours on the four things it can't fix. Those are authentication, list quality, who receives the first real campaigns, and three signals checked every week. Get those right and the ramp has something good to build on. Get them wrong and the ramp builds a bad reputation, just more politely.
This piece walks you through onboarding one new client on SendTo, from registering the domain to sending the first campaign. Every step gives you the action, what you should see when it's working and the mistake to avoid there. It's written in the last week of February 2024, the month the largest mailbox providers started enforcing their new bulk sender rules, so the timing matters for anyone launching a client right now.

By the end, your new client sends from a warmed domain, and you need five things before you start
Here's what you'll have when you finish. A brand-matched sending domain that recipients recognise, with SPF, DKIM and DMARC published and passing. A verified contact list with dead, risky and suppressed addresses already gone. And a first campaign sent to the client's most engaged contacts, with real engagement numbers you can show them on your next call.
Gather these five things before you touch any settings. Missing one of them halfway through is how a two-week setup turns into six.
- DNS access to a domain the client controls. That means a login at their registrar or DNS host, or someone on their side who will add records within a day.
- The client's contact list, plus a plain answer about where it came from. Website signups, past customers, a trade show, a bought file. The source decides what stays.
- A sending account on SendTo for the client, set up under your agency's brand.
- Two to four weeks on the calendar before the first full-list campaign, agreed with the client in writing.
- A short list of the client's warmest contacts. Recent buyers, recent signups and anyone who clicked something in the last 90 days.
Set the timeline on the first client call, because most warmup failures start with a rushed launch date
The riskiest client isn't the one with a messy list. It's the one who wants a full-list send on day three. A brand-new domain has no history, so the first big blast is the only evidence mailbox providers have. If 8,000 messages arrive from a stranger and a slice of them bounce or get marked as spam, that becomes the domain's reputation. Clawing it back takes longer than the warmup would have.
So settle the date before anyone opens the platform. One sentence does the job, and it's worth saying word for word.
Your new sending domain is like a new phone number, so we start by calling the people who already know you, then widen the circle over two to four weeks so the inbox providers learn to trust it.
Clients take this better than you'd expect right now, because the rules changed this month. Since February 2024, the largest mailbox providers require bulk senders to authenticate their mail with SPF, DKIM and a DMARC record. They want spam complaint rates kept under a published ceiling of 0.3%, and they want a working one-click unsubscribe in every marketing email. Business owners have seen this in the trade press. Telling them the timeline exists to meet those rules makes you sound careful, not slow.
When the client insists on a promotion next week
Don't refuse. Send it, but only to the warm list from your prerequisites. A spring offer that reaches 400 recent buyers next Thursday and gets strong opens does more for the domain than the same offer sent to everyone. The rest of the list gets it later in the ramp, or in the next promotion. Put that in an email to the client so the decision is on record.
Step 1: Register a brand-matched secondary domain so the client's main domain is never at risk
Pick a domain that reads as the client's brand at a glance. If the client is Hollis Joinery at hollisjoinery.co.uk, something like hollisjoinery-news.co.uk or gethollisjoinery.co.uk works. Register it in the client's name, point its web address at their main site, and make sure replies go to an inbox somebody reads. A reply from a real customer is one of the best signals a new domain gets.
You should see a domain that a customer would recognise in their inbox without stopping to wonder who sent it. Read it aloud to the client. If they hesitate, pick another.
There are two mistakes here, and both are common. The first is a lookalike or unrelated domain. Something like h0llisjoinery.co.uk, or a generic name such as hjoffers.com, looks exactly like phishing to filters and to people. The second is warming the client's main domain, the one carrying their quotes, invoices and supplier email. If a marketing send goes badly, their everyday business mail suffers with it. A separate domain keeps that risk away from the mail that pays their bills. The reasons and the setup are covered in our guide to secondary domains, so we won't repeat them here.
Step 2: Publish SPF, DKIM and DMARC before the domain sends a single message
Order matters here. Authentication goes in first, before any warmup message leaves. SendTo gives you the exact records for the new domain. Add each one at the client's DNS host, then run SendTo's domain check. DNS changes usually show up within an hour, though some hosts take longer.
Start DMARC at p=none with reporting switched on. That policy tells receiving servers to report on your mail without blocking anything, which is the minimum the new bulk sender rules ask for. Once a few weeks of reports show everything passing, tighten it to quarantine. A starting record looks like this, with the reporting address changed to one you watch.
_dmarc.hollisjoinery-news.co.uk TXT "v=DMARC1; p=none; rua=mailto:dmarc-reports@hollisjoinery-news.co.uk"
You should see all three records passing in SendTo's domain check. Don't move to Step 3 with anything showing as failed or pending.
Two mistakes cause most failures here. One is publishing more than one SPF record on the same domain. Receiving servers treat that as an error and SPF fails outright, so merge everything into a single record. The other is DKIM pasted with broken line wrapping. Long DKIM keys get split or gain stray spaces when copied out of an email or a PDF. Copy straight from SendTo into the DNS host. Also check the host hasn't tacked the domain onto the record name a second time, which leaves you with something like _dmarc.hollisjoinery-news.co.uk.hollisjoinery-news.co.uk.
Step 3: Verify and clean the client's list before warmup begins, not after the first bounce
Import the client's list into SendTo. The importer maps spreadsheet columns to fields on its own, picks up where it left off if the upload gets interrupted, and applies platform-wide suppression, so addresses already known to bounce or complain across the platform are held back. Then verify every address before anything is sent. If you're wondering whether this step is worth paying for, we've covered whether automated list cleaning is worth it separately.
You should see a count of what came off the list, split into invalid, risky and suppressed addresses. On a list the client has collected through their own website, that number is usually small. On a five-year-old export from an old CRM, it can be a big chunk. Show the client the figure. It tells them how healthy their data is before you've sent a thing.
The mistake is keeping old or bought contacts "just for warmup". The reasoning goes that volume is volume. It isn't, because a bounce early in the ramp costs far more than one later. On day two the domain might send 200 messages. If 30 of them hard bounce, that's a 15% bounce rate on the only history the domain has. Thirty bounces inside a 20,000-message month barely register. Early sends are small, so every bad address carries more weight. Bought lists add spam traps and complaints on top of that.
Fix the source, too, not just the file. New contacts should come in through SendTo's signup forms, which are protected against bots and can run double opt-in, embedded on the client's site or hosted on a landing page. Otherwise you'll clean the list now and watch fake signups refill it while the warmup is still running.
Step 4: Switch on automated domain warmup for new sending accounts and leave the ramp alone
This is the shortest step, and the one where you have the least to do. Turn on SendTo's automated warmup for the new domain in the client's sending settings. From then on the platform runs the ramp. Daily volume rises a step at a time. Dispatch speed is set separately for each mailbox provider and each domain, so a burst of mail doesn't hit one provider all at once. Campaign volume is spread across several brand-matched sending domains, so no single domain carries the whole load.
You should see daily volume climbing gradually in the sending view. Some days the line looks flat, then it moves up. That's normal pacing, not a fault. If you want to know how the ramp is shaped and why the steps fall where they do, we've written up automated domain warmup schedules separately.
The mistake is touching it. An agency sees a quiet Tuesday, decides the domain looks healthy, and pushes the full list through to catch up. Or it pauses warmup for a week while the client approves copy, then restarts at the old volume. Both throw away the one thing a new domain has going for it, which is a steady, believable pattern. Leave the ramp alone and put your time into the next two steps.
Warming several client domains at once works, if each one stands on its own
You can onboard three clients in the same week. Pacing runs per domain, so one client's ramp doesn't eat into another's. What you can't do is share a list or a domain between clients to save time. Each client gets their own brand-matched domains and their own contacts. The way volume is shared across those domains is covered in our piece on multi-domain distribution.
Step 5: Send the first real campaigns to the contacts most likely to open them
The first real campaign is a reputation event, not a sales event. Build the opening segment from the warm list you gathered at the start. Recent buyers, people who signed up in the last few weeks, and anyone who clicked something in the last 90 days. For Hollis Joinery that meant 400 people who'd had a quote or bought in the past quarter, out of 8,000 on file.
After two or three sends you'll have real history on the new domain. Use it. SendTo builds segments from clicks, from people who opened but didn't click, and from non-openers on past campaigns. Widen the audience in that order. Clickers first, then openers, and non-openers last, once the domain has a few weeks of good results behind it.
Before each launch, run SendTo's AI reviewer over the campaign. It checks the subject line, structure, language, links, alignment with the brief and basic compliance, including a working unsubscribe. A broken link or a missing unsubscribe in week one hurts more than the same slip in month six, for the same reason early bounces do.
You should see a small send with strong engagement. A healthy result on a warm segment is a good share of real people opening, a handful of clicks and a reply or two. Show the client that number. It's proof the slow start was the right call.
Two mistakes show up here. The first is sending the full archive first because the copy is ready and the client is keen. The second is an image-only email, where the whole message is one big picture with little or no live text. Filters read very little in it, people with images switched off see a blank box, and it tends to earn fewer opens and more spam folder placements. Build the email in HTML with real text, a clear button and the image as support.
Step 6: Check three signals each week, because automation removes the work but not the judgement
Does automated warmup mean you never look at deliverability again? No. It means you look for ten minutes a week instead of an hour a day. Put it in the calendar for the same morning each week and check three numbers for every client in warmup.
- Bounce rate. Keep hard bounces under 2% per send. Anything above that points at the list, not the ramp.
- Spam complaint rate. The largest providers now publish a ceiling of 0.3%. Treat that as the cliff edge, not the target, and aim for 0.1% or lower. A send that comes in above 0.1% gets a look before the next one goes.
- Real human engagement. Opens, clicks and replies from actual people, compared week to week as volume rises.
The third number is the one that fools people. Security scanners at many companies open every email and follow every link before a person sees it, which makes a campaign look busier than it was. SendTo's reports exclude those scanner opens, so the figures in the client portal and your partner view show real people. Why that matters, and how scanner traffic skews the numbers, is in our guide to real human open rates.
The mistake is reading one good week as the job being done. Engagement on the warm segment is always high. The test comes when you add the openers who don't click and the older contacts. Watch whether the numbers hold as the audience widens, not just whether they're good today.
How to tell the warmup worked, and what to do when it did not
A warmup that worked looks dull. Engagement stays steady as volume grows. Bounces stay low, complaints stay well under 0.1%, and test sends to your own seed accounts at the major providers land in the inbox, not spam or promotions-only. After two to four weeks you send the full list and the numbers barely move. That's the answer to how long a new client's domain needs. Two weeks for a clean, recent list, four for an older one, and longer if any signal wobbles.
When test emails land in spam halfway through
Don't panic, and don't change five things at once. Work through it in this order.
- Pause any volume increases. Hold at the current level rather than stopping entirely, so the pattern stays steady.
- Go back to the most engaged segment, the recent clickers, for the next two or three sends.
- Re-check DNS in SendTo's domain check. A host that changed a record, or a second SPF record someone added for a new tool, breaks authentication without anyone noticing.
- Ask where the newest contacts came from. A batch added mid-warmup from an old export or a bought file explains a sudden drop.
- Look for a content trigger. A new link shortener, a heavy image, or a subject line full of urgency all show up in the AI reviewer's checks, so run the last campaign through again.
Once two or three sends to the engaged segment come back healthy, let the ramp continue.
When to retire a domain and start again
Sometimes recovery doesn't come. If a domain still lands in spam after two to three weeks of small sends to the most engaged contacts, with authentication passing and a clean list, its reputation is costing more than it's worth. Retire it. Register a new brand-matched domain, fix whatever caused the problem first, and warm the new one from the start. That's the real value of sending from a separate domain. You lose a few weeks, not the client's everyday business email.
A checklist to copy into your onboarding doc
- Two-to-four-week timeline and warm-list-first rule confirmed with the client in writing
- Brand-matched secondary domain registered in the client's name, replies going to a monitored inbox
- SPF, DKIM and DMARC at p=none published, all passing in SendTo's domain check
- List imported, every address verified, removed counts shared with the client
- New signups coming through bot-protected forms, with double opt-in where it suits the client
- Automated warmup switched on and left untouched
- First sends to recent buyers, recent signups and recent clickers only
- AI reviewer run before every launch, unsubscribe link checked
- Weekly check of bounces, complaints and real human engagement booked in the calendar
- Pause thresholds agreed: 2% hard bounces, 0.1% complaints on two sends
An onboarding process that protects every client's domain is worth recommending
An agency doesn't onboard one client. It onboards one this week, two next month and ten by the end of the year. Each one needs a domain, authentication, a clean list and a ramp. On SendTo, the sending, warmup, pacing and address checks are handled for every one of them, under the agency's own brand and at prices the agency sets. The agency spends its hours on the judgement calls in Steps 5 and 6, and on the client relationship. That's a clear reason to sell email as their own product.
If you're a consultant, freelancer or creator who advises agency owners, that's a platform you can recommend on its merits. SendTo's affiliate programme pays you 20% of the partner subscription each referred agency pays SendTo, every month it pays. You never get a share of what the agency's own clients pay the agency. Attribution lasts 90 days from the first click, the first touch wins, and commission is paid monthly by PayPal. For plan costs, point agencies to the pricing page.
Recommend a platform that handles warmup for every client your agency contacts onboard, and earn 20% of each referred agency's partner subscription every month it pays.
Join the SendTo affiliate programme
