Affiliate marketing tips

How to Build a Resource Library That Generates Passive SaaS Referrals

Five agency templates, one email gate and a five-email sequence. How to build a resource library that keeps earning SaaS referrals, and the quarterly refresh that keeps it working.

Man drawing an email marketing workflow diagram on a whiteboard
Photo by Campaign_Creators

A b2b affiliate resource library earns referrals when every asset in it is a tool an agency picks up on a real client job this week, and each one stops at the exact point where a platform takes over. A campaign brief template that ends with "now turn this into an HTML email" sells software. A forty-page guide to growth doesn't. It collects an email address, then sits in a downloads folder.

This article walks you through building that kind of library from scratch. You'll pick the agency jobs worth solving, build five working templates, gate them behind a single email field and write a short sequence that does the recommending for you. We'll also be straight about the word "passive". The library keeps earning after launch, but only if you schedule a refresh every quarter, and you won't get a fair read on referrals for about 90 days.

Timing matters too. Interest in email marketing peaks in November, December and January. If you build in October 2025, your library is live, indexed and collecting subscribers before agencies start planning their busiest sending season.

By the end you will have a gated library, a delivery sequence and tracked links, and you need four things before you start

Here's what you'll have once you finish all six steps. Five downloadable assets that agencies reuse on client work. One hosted gate page listing all five, protected against bots. A five-email delivery sequence that teaches four times and recommends once. And tracked affiliate links placed inside the assets and in the final email, so you can see which template sends people to a platform.

This isn't an open resource hub. A hub is a public set of pages built to rank and send search traffic straight to tools. This library is smaller, gated and built to start a conversation by email. The hub earns on the first visit. The library earns over the following weeks, because the sequence gets five chances to be useful before it asks for anything.

Before you start, get these four things in place.

  • An approved affiliate account, so your tracked links exist before you write a single template.
  • A domain or blog where your search articles will live and point readers to the library.
  • A landing page and form tool. SendTo's own landing pages and bot-protected signup forms do this job, and the sequence can run on the same platform.
  • Roughly two working weeks. One week for the five assets, a few days for the gate page and sequence, and the rest for testing.

Step 1: Decide which agency jobs your b2b affiliate resource library will solve, not which topics interest you

Start with a blank sheet and write down the jobs an agency repeats for every new email client. Not themes. Jobs. Things with a start, an end and a client waiting on the result.

For an agency selling email marketing to small businesses, that list looks something like this. Onboarding a new sender and setting up their domain. Cleaning a list the client exported from an old system. Writing a campaign brief the client will actually approve. Running QA before launch so nothing embarrassing goes out. Reporting opens the client can trust. Turning a one-off advisory project into monthly revenue.

Next to each job, write the pain in the agency's own words. The questions people ask in this trade are a good source. They ask whether list cleaning is legitimate. They ask why companies send from secondary domains. They ask how to track open rates accurately, whether promotional emails built as single images work, and how to secure a signup form before a site launches. Every one of those questions is a job with a named pain behind it.

What you should see at the end of this step is a shortlist of five to seven jobs, each with one line describing what goes wrong when it's done badly. "Imported list bounces and the client's domain gets flagged" is a named pain. "List hygiene" is a topic.

Step 2: Build five assets that each end exactly where a platform takes over

Each asset does one job by hand, properly, and then names the step that's slow or risky to keep doing manually. That handoff point is where your affiliate link belongs. If the template works fine forever without software, it's a nice freebie but it won't refer anyone. If it's useless without software, it reads as an advert. Aim for the middle. Useful on its own, with an obvious place where a platform saves hours.

Campaign brief template

A one-page form the agency fills in with the client. Brand presets covering logo, colours, fonts and tone. The audience and the one action you want them to take. The goal for the send. Three to five subject line options. A real line from it reads "Primary call to action, one only, written as the words on the button."

The handoff is design. With a finished brief, the agency still has to build the HTML email. On SendTo, the platform turns that brief and the brand presets into an HTML email in seconds, with one-click remix if the first version isn't right. End the template with that step.

Sending domain onboarding checklist

This covers authentication records, setting up a secondary sending domain so the client's main domain isn't exposed, warming that domain up gradually and pacing sends per mailbox provider. Explain why secondary domains matter, because it's one of the questions agencies keep asking.

Doing this by hand is slow and risky. Manual warmup means weeks of carefully increasing daily volumes, and one rushed send to a full list on a cold domain lands the client in spam. SendTo applies automated warmup to new sending domains, governs dispatch speed per provider and domain, and spreads campaign volume across several brand-matched sending domains so no single domain carries the full load. The checklist's last section is where you say so.

List cleaning audit sheet

Answer the question honestly. Yes, list cleaning is legitimate when it means checking that addresses exist and removing people who unsubscribed or bounced. It isn't legitimate when it's used to launder a bought list. The sheet walks through column mapping, duplicates, role addresses, past bounces and the suppression list that has to carry across from any old system.

The handoff is verification and suppression at scale. SendTo verifies emails before sending, maps imported spreadsheets automatically, resumes interrupted uploads and applies platform-wide suppression, so an unsubscribed address can't sneak back in through a new import.

Pre-launch QA checklist

Subject line length and preview text. Structure and a single clear call to action. Every link clicked and checked. Unsubscribe link and sender address present. And one line agencies always skip, "Is any important message carried only inside an image?" Image-only promotional emails are a real risk, because many inboxes block images by default and the reader sees a blank box.

The faster route is SendTo's built-in reviewer, which checks subject lines, structure, language, links, alignment with the brief and basic compliance before launch. Your checklist teaches what to look for. The reviewer does the looking on every send.

Retainer-to-platform revenue worksheet

This one speaks to the agency owner, not the account manager. It turns advisory work and existing retainer clients into recurring monthly platform revenue. The agency enters its own figures, such as number of clients, hours spent on email each month and what it plans to charge for a branded platform.

State plainly on the sheet that the agency sets its own prices. SendTo's prices never appear in it, because they change and a downloaded spreadsheet doesn't. Where the worksheet needs a platform cost, add a note sending the reader to the SendTo pricing page to fill that cell in themselves.

Step 3: Gate the library with one email field on a hosted page protected against bots

Gating doesn't kill your traffic, because your search articles stay open. Only the downloads sit behind the form. You're trading a click for an email address, and that address is what lets the sequence do its work.

Build one landing page listing all five assets, with a one-line description of the job each solves. Add a single email field and a consent line. On SendTo you can host this on a landing page or embed the signup form on your blog, with bot protection on the form and optional double opt-in. Switch double opt-in on. It costs you a few unconfirmed signups and saves you from a list full of typos and fake addresses.

Your consent wording should say exactly what people get. "Send me the five agency templates and a short series of emails on using them. Unsubscribe any time." If you plan to keep emailing after the sequence ends, say that too. Link your privacy notice next to the button. Under GDPR, collecting only the email address you need keeps your exposure small and your record of consent simple.

What you should see is a test signup confirming by email and landing in a tagged segment, such as "library-oct25", with the confirmation time recorded. If it lands untagged, fix that now. You'll need the tag to measure everything later.

Before launch, check the page loads over a secure connection with a valid certificate and that the form rejects an obvious bot submission. A form that posts over an unsecured page triggers browser warnings and loses signups on day one.

Step 4: Write a five-email delivery sequence that teaches four times and recommends once

The sequence does the recommending, not the download page. Five emails, each short, each about one thing.

  1. Day 0, delivery. The five download links and one line on which to open first. No affiliate link.
  2. Day 2, a usage tip. How to run the campaign brief with a client on a call in under ten minutes.
  3. Day 4, a mistake to avoid. Sending a full list from a cold domain, and what happens to the client's sender reputation.
  4. Day 7, a short case story. One agency, one job, before and after.
  5. Day 10, the recommendation. Which platform you use for the handoff steps, why, and your affiliate link.

For the case story email, borrow the structure from our guide to agency case studies. A good one fits in a hundred words. Priya runs a two-person agency in Leeds. Her account manager spent most of a Friday cleaning an imported list for a florist client, and the first send still bounced. She now imports, verifies and suppresses in one pass, and Fridays go to client calls.

Use segments to decide who sees email five in full. SendTo builds segments from clicks, unclicked opens and non-openers on past campaigns, and its reports exclude security scanner opens so you're counting real people. Readers who clicked a template link in emails two to four get the recommendation as written. Readers who opened without clicking get a version that leads with the template again. Non-openers get one resend with a new subject line, then rest.

When the five emails finish, the subscribers don't disappear. Our piece on email list monetisation covers what to send them next without turning the list into a stream of offers.

Your links go in two places. One goes inside each asset, on the handoff line, and one goes in email five. Leave them out of sidebars, footers and banners. A link that appears at the moment the reader has just done a job by hand reads as advice, and the same link plastered across every page reads as an advert.

Give each asset its own tracked link, using the sub-ID or campaign tag your affiliate dashboard offers. Tag the brief template "lib-brief", the domain checklist "lib-domain" and so on, and give email five a tag of its own. That's how you'll know which template sends people to a platform, and it's the only way to answer that question later. You should be able to see five asset tags and one sequence tag in your dashboard before launch. Using one generic link everywhere is the mistake here, because you lose every signal you built the library to collect.

What you earn, stated exactly

SendTo pays you 20% of the partner subscription each agency you refer pays us, every month that agency keeps paying it. You never get a share of what the agency's own clients pay the agency. The agency sets its own client prices, and those payments stay between them and their clients. Attribution lasts 90 days from the first click, the first touch wins, and commission is paid monthly by PayPal. Our review of the SendTo affiliate programme goes through each of those terms in more detail.

First touch means the clock starts at the first click, not the last

A library is a slow, repeated-contact format, so this matters more for you than for a single review page. Say Tom, who runs a three-person agency, clicks the link in your domain checklist on 6 October. His 90 days start then. Three weeks later he clicks your QA checklist link, then your email five link. Those later clicks don't restart the clock. If he signs up by early January, the referral is yours. If he first clicked another affiliate's link before he ever reached yours, it's theirs, however useful your library was.

Step 6: Bring readers in through search pages that each lead to one library asset

The gate page won't rank by itself, and it doesn't need to. Your traffic comes from open articles on your own blog, one per asset, each answering a question an agency actually types. Each article ends with one call to the matching download. Just one.

  • "Why do companies send from a secondary domain?" leads to the sending domain onboarding checklist.
  • "Is email list cleaning legitimate?" leads to the list cleaning audit sheet.
  • "Do image-only marketing emails work?" leads to the pre-launch QA checklist.
  • "How do I track open rates accurately?" leads to the QA checklist's reporting section, which shows how scanner opens inflate the count.
  • "How do I turn a retainer into monthly software revenue?" leads to the revenue worksheet.

Write each one so it fully answers the question with no download needed. The asset is the next step, not the missing half of the answer. Our guide to building an SEO content strategy for recurring SaaS commissions covers keyword choice and internal linking. Here you only need five pages, each pointing at one door.

Timing does a lot of the work. As of this week, the end of September 2025, publishing in October gives your pages several weeks to get indexed before interest in email marketing peaks in November, December and January. Agencies plan their busiest sending season then, and that's when a QA checklist feels urgent. Interest drops to its lowest in June, so schedule your biggest refresh for June, when nobody's waiting on you.

The mistake in this step is pointing a search article straight at your affiliate link and skipping the library. You'll get the odd click, but you lose the email address, and with it the four emails that earn the recommendation.

Check it worked at 30 and 90 days using three numbers

You only need three numbers. Gate conversion rate is signups divided by gate page visits. Email five click rate is human clicks on the recommendation divided by the people who received it. Referred agencies per 100 subscribers is the one that pays.

Count human activity only. Security scanners in corporate inboxes open emails, and often click links, before a person ever sees them, and agency inboxes are full of them. SendTo's reports leave scanner opens out, so the opens and clicks you see are people. Our piece on how security scanners distort open tracking explains why a raw open rate flatters a business list.

At 30 days, look for signups landing in your tagged segment and clicks on the asset links and email five. Referrals this early are a bonus, not a verdict. At 90 days, the attribution window closes for your first October subscribers, which gives you your first fair read on referrals. Check which asset tag the referred agencies clicked first. That's your strongest template.

If it did not work, find the stage where people drop off and fix only that

Change one stage at a time. If you rewrite the gate page, the sequence and the search articles in the same week, you won't know which change helped. Find where the numbers fall off, then fix that stage.

What you seeWhere the problem isWhat to fix first
Plenty of visits, few signupsThe gate pageCut fields back to email only, rewrite each asset's line as the job it solves, check the form loads securely
Signups, but almost no email five clicksThe sequence or relevanceMake emails two to four about the asset they downloaded, sharpen the case story, check the segments are routing correctly
Clicks, but no referralsThe audience or the handoffCheck whether your readers are agencies or solo freelancers, and rewrite the handoff line so it names the hours the platform saves

That last row deserves a closer look. A freelancer with two clients happily uses your checklist and has no reason to run a branded platform. If your search articles attract more freelancers than agencies, aim the questions at agency jobs instead, such as onboarding a new client's sending domain, not tidying your own newsletter.

The quarterly refresh is what keeps it passive

Block half a day every quarter. Retire any asset that nobody downloaded last quarter, and replace it with the job your email two replies keep mentioning. Re-read every checklist line against current inbox provider rules, check every link still resolves, and update the search article that leads to each changed asset. Make June the big one. The library keeps earning between refreshes, but it only stays useful if you keep it current.

Build it in October, give it 90 days, and judge it on referred agencies per 100 subscribers. If you haven't got your affiliate account yet, start there, because every tracked link in your five templates depends on it.

Get your tracked links before you write the first template. You earn 20% of the partner subscription of every agency you refer, every month it pays.

Join the SendTo affiliate programme

Frequently asked questions

Will gating my resources kill my traffic?

No. Your search articles stay open, and only the downloads sit behind the form. You're trading one click for an email address, and that address gives your sequence five chances to be useful before it recommends anything.

Which templates do agency owners actually download and reuse?

They reuse tools for jobs they repeat with every client: a campaign brief template, a sending domain checklist, a list cleaning audit sheet, a pre-launch QA checklist and a revenue worksheet. An agency opens a QA checklist before every launch. Nobody opens a scaling guide twice.

How do I put affiliate links in templates without them reading as adverts?

Add one short sentence where the manual route gets slow or risky, then the link. Something like "From here, the manual route is about two hours per client. This is the platform we'd use instead." In context, that reads as advice. A footer banner reads as an advert.

Do I get paid on what the agency's clients pay?

No. You earn 20% of the platform fee (the partner subscription) that each agency you refer pays SendTo, every month they pay it. You never get a share of what that agency's own customers pay the agency. Commission is paid monthly by PayPal.

How does first-touch, 90-day attribution work when people download several assets over weeks?

The 90-day clock starts at the first click on any of your links, not the last one, and the first touch wins. That's often a link inside the first template someone opens, so every handoff sentence has to be good.

How long before the library produces its first referral?

You won't get a fair read for about 90 days. Check your three numbers at 30 days to catch drop-off early, then judge the library properly at 90.

Is a resource library really passive, or will I keep maintaining it?

Passive means low upkeep, not no upkeep. Book a half-day review every quarter. Skip it and the checklists drift out of date, and downloads stop turning into clicks.

Can I build the gate page and delivery sequence on SendTo itself?

Yes. SendTo's landing pages host the gate, and its bot-protected signup forms collect the email with optional double opt-in. The five-email sequence runs on the same platform. Turn double opt-in on, because it keeps typos and fake addresses off your list.

Earn 20% of what every partner you refer pays, every month.

Refer agencies, studios, consultants and resellers to SendTo. Your commission is 20% of the platform fee each partner pays, for as long as they pay it.

90-day attribution · Paid monthly by PayPal