Agency owners don't buy software from a feature list. They buy a business model they can see working, with numbers close to their own. If you're a SaaS affiliate and you want to host live webinars, the hour has one job. You take one agency's advisory work and turn it into recurring monthly platform revenue on screen, in real time, while the people watching ask questions.
A written review can't do that, and neither can a commission table. A live session can. It also gives you three clean chances to put your link in front of a warm audience: in the chat, in the follow-up email and in the replay.
This guide walks through the plan, the script and the demo, using SendTo, the email marketing platform agencies sell to their clients under their own brand. Every step gives you the action, what you should see when it's done and the mistake that trips people up at that point.

By the end you will have a repeatable live session that earns trust, and here is what to prepare first
When you host live webinars as a SaaS affiliate, you want a format you can run again next month without starting from scratch. By the end of this guide you'll have five things you can reuse:
- A 60-minute session format with a timed running order
- A registration page with a title agency owners actually sign up for
- A demo plan with a backup for when the connection drops
- A follow-up sequence that treats attendees, clickers and no-shows differently
- A way to measure the session over the full attribution window, not just the first day
The pages ranking for SaaS affiliate programmes give you lists of commission rates. Those tell you what you'd earn. They tell an agency owner nothing about what they'd earn. On a live session they can type "what if my clients only send twice a month?" and watch you rework the model with their figures. That one exchange earns more trust than any rating out of ten.
Have these ready before you set a date
- A webinar tool that supports live chat, screen sharing and recording
- A SendTo account you can demo from, with a sample client already set up
- A registration page, either on your own site or inside your webinar tool
- An email tool that can tag registrants by whether they attended and clicked
- Your SendTo affiliate link, tested in a private browser window
- A one-line affiliate disclosure for the registration page, the first slide and the follow-up email
Keep the disclosure plain. Something like "I'm a SendTo affiliate, and SendTo pays me a commission if your agency signs up through my link" does the job. Say it out loud in the first two minutes as well. Agency owners sell for a living, so they'll trust you more for saying it, not less.
How many people make it worth the effort? A room of 15 agency owners who stay through the demo is worth more than 200 tool shoppers who leave at minute ten. Judge it by who shows up, not by the headcount.
Step 1: Build the session around one agency problem, not one product
Pick one promise and build the whole hour on it. A good one for SendTo is "turn your retainer advice into monthly platform revenue". It names something the agency already does, the advice it gives clients on email, and a result it wants, which is income that recurs without more billable hours.
Turn that promise into the session title. "Turn Your Retainer Advice Into Monthly Platform Revenue, Worked Live" tells an agency owner exactly what they'll see. When you're done with this step, you should have a title an agency owner would register for even if they'd never heard of SendTo. Test it on two or three agency contacts. If they ask "which tool is it?" before "how does it work?", rewrite it.
The mistake here is calling the session a "SendTo review" or "best email tools for 2025". Those titles pull in people comparing tools for their own newsletter. They aren't wrong to come, but they won't resell a platform to clients, and they'll leave once they work out the session isn't a feature shootout. Keep the product out of the title and put it in the middle of the hour, where it proves the model.
If you want the background on the model itself before you write the pitch, we've covered turning strategy consulting into recurring software revenue in its own piece. The session is that argument, performed live.
Step 2: Schedule and promote around the months agencies actually plan in
Set a date and open registration two to three weeks before it. Less than that and agency owners have already filled their calendars. Much more and they forget they signed up.
Timing matters more than the day of the week. Public interest in email marketing peaks in November, December and January and drops to its lowest in June. Writing this in mid-September 2025, that puts the best window for a session in late September or October. That's when agencies are setting up clients for holiday campaigns and planning the new-year push, and a new revenue line for those clients is easy to picture. A session in June reaches the same people when they're least interested in the subject.
Promote it where agency owners already read: your email list, the communities you're active in and one short post a week on the channels your audience uses. Send three reminders, a week before, the day before and an hour before. When this step is working, registrations build steadily across the window instead of arriving in one burst on the day you announce.
The mistake is announcing once and hoping. One post gets one spike, then nothing. The other mistake is a fully automated session dressed up as live. Run the first one live, record it and offer the recording as a replay, labelled as a replay. Pretending a recording is live costs you the trust the whole format exists to build.
Step 3: Script the hour as a worked revenue model with the demo in the middle
An agency owner should leave with a filled-in model, not a list of features. Script the hour so the demo arrives once they already know what it's proving. Here's the running order we'd use.
| Minutes | Segment | What happens |
|---|---|---|
| 0 to 10 | The problem | Unpaid advisory work, and retainers that hit a ceiling because more income means more hours |
| 10 to 25 | The model | A flat platform fee to SendTo, the agency sets its own client prices, clients buy their own usage on top |
| 25 to 45 | The demo | A finished campaign for a sample client, the AI reviewer, then the client portal report |
| 45 to 60 | Q&A | Deliverability, list cleaning, pricing questions and the affiliate link again |
For the model segment, show a simple worksheet with blanks the attendee fills in. How many clients could you put on the platform? What monthly fee would you charge each one? What's the platform fee you'd pay SendTo? Subtract the fee from what your clients pay you and you have the monthly margin. Each client also buys their own sending usage on top of the subscription you set, so the agency isn't carrying that cost.
Can you show SendTo's prices during the session? No. Prices change and your recording doesn't, so a figure that's right today is wrong in the replay six months from now. Leave the platform fee as a blank and send people to the pricing page to fill it in themselves. That also gives them a reason to visit the site while the session's still on.
When this step is done, you should have a script where every minute of the demo answers a question the model raised. The mistake is putting the demo first because it looks impressive. Without the model, a well-designed email is just a nice email, and nobody watching has a reason to sell it.
Step 4: Run a demo that shows a finished campaign in minutes and survives a bad connection
Prepare everything the day before. Set up a believable sample client, say a family bakery with a list of a couple of thousand local customers, and give it a brand preset with its colours, fonts and logo. Write a short campaign brief for it, such as a pre-order offer for holiday cakes. A real-sounding client makes the model feel like the attendee's own business.
Then run the demo in this order on screen:
- Paste the brief and let SendTo design the HTML email from it and the brand preset, which takes seconds
- Use the one-click remix to show a second layout from the same brief
- Open the built-in AI reviewer and walk through what it checks before launch: subject line, structure, language, links, alignment with the brief and basic compliance
- Switch to the client portal and show a report with real human opens, clicks and bookings, with security scanner opens left out
What you should see is a finished design on screen within the first few minutes of the demo. That moment is the agency's sales call in miniature. It's how they'd show a new client a finished campaign before the call ends, which we've written up in more detail in pitching finished email campaign designs on initial client calls.
Be straight about what the tools do. The AI design gives you a finished, on-brand starting point, but the agency still reads the copy before it goes out. The reviewer catches problems with structure, links and basic compliance, and it isn't legal advice. If you say that out loud, the sceptics in the room will believe the rest of what you show them.
The mistake here is building from a blank account in front of the audience or changing settings you haven't tested. If you're nervous about going live, demo only the four steps above, all of them rehearsed. That's enough to prove the model, and it leaves 15 minutes for the questions that actually decide whether an agency signs up.
Step 5: Answer the questions agency owners always bring before they ask them
The Q&A decides the session. Agency owners stake their name on whatever they resell, so the questions they bring are about risk, and nearly all of them are about deliverability. Write a short, honest answer to each one below before the day and keep them open beside your slides. When this step is done, you should be able to answer every one in under a minute without reading.
The mistake that costs the most trust is brushing these off. "Don't worry, deliverability is handled" sounds like a dodge to someone whose client once landed in spam. Say what the platform does, say what it can't do, and move on.
Is list cleaning legitimate, and why verify before sending?
Yes, it's legitimate, and it protects the sender. SendTo verifies addresses before a campaign goes out, and when an agency imports a list it applies suppression across the platform, so addresses known to bounce or complain don't get mailed again. Every hard bounce and spam complaint counts against the sending domain's reputation with mailbox providers. Cleaning the list first keeps those numbers low, which keeps the next campaign out of the junk folder. Be clear that verification removes bad addresses. It doesn't turn a list bought from a stranger into people who want the email.
Why send from secondary domains instead of the main one?
Because the main domain carries the client's everyday email, invoices and replies included. SendTo spreads campaign volume across several brand-matched sending domains, each with automated warmup, so no single domain takes the full load. If one domain has a bad week, the client's main domain still delivers their ordinary mail. The domains match the brand, so recipients still see a name they recognise.
Should we run our own mail server instead?
Be fair here, because some agencies in the room will have a technical lead who likes control. Running your own server gives you full control over the setup and the logs. It also gives you the ongoing work of warming up new domains, holding sending speeds to what each mailbox provider accepts and watching reputation every day. SendTo handles that work, with dispatch speeds governed per provider and per domain. For an agency that wants to sell campaigns rather than run infrastructure, that trade usually settles it. For an agency that wants to own every setting, a self-hosted server is a fair choice, and you should say so.
How accurate are open rates now?
Less accurate than they look in most tools. Corporate security scanners open and click links in incoming mail to check them, and those automated opens inflate the figures. SendTo's reports leave scanner opens out and show human opens, clicks and bookings, in the client portal and in the partner view. That matters to an agency because the report is what their client sees. A smaller, honest number holds up better than a big one the client stops believing.
Can we schedule delayed sends, use image-only emails, or secure forms before launch?
Keep these quick. Yes, sends can be scheduled for later. Single-image emails are a poor bet, because images get blocked by default in many inboxes and an email with no live text gives filters little to read, so HTML and text layouts do better. Signup forms are protected against bots, can be embedded on a site or hosted on a landing page, and support optional double opt-in, which is worth switching on for any client collecting addresses ahead of a launch.
Step 6: Make attribution work after the session ends, not only during it
Your link should appear four times. Post it in the chat when the demo finishes, post it again at the start of Q&A, put it on the final slide, and put it in the follow-up email. People click when a question has just been answered, not when you first mention the link, so spread it across the moments that matter.
Explain the terms once, plainly, because affiliates and the agency owners themselves will ask. Here's exactly how SendTo pays.
- You earn 20% of the partner subscription each agency you refer pays SendTo
- It's paid every month that agency keeps paying
- It's never a share of what the agency's own clients pay the agency
- Attribution lasts 90 days from the first click
- The first touch wins
- Commission is paid monthly, by PayPal
So if an attendee clicks during the session and signs up seven weeks later, the referral is yours, because it falls inside 90 days of that first click. The honest downside is the other half of the rule. If they clicked another affiliate's link before your session, that first touch wins and the referral isn't yours, however good your hour was. You can't fix that, so don't chase it. We go through why terms like these matter in the programme terms creators should check before promoting.
What you should see is clicks recorded in your affiliate dashboard during and after the session, not just in the first ten minutes. The mistake is pasting the link once at the start. Late arrivals miss it, the chat scrolls it away, and the replay viewer never sees it at all.
Step 7: Follow up within 24 hours with the replay and a segmented sequence
The day after the session is when interest is highest. Wait a week and the agency owner has moved on to client work. Before you send anything, split your registrants into three groups using the attendance and click data from your webinar tool.
- Attended and clicked. Send the revenue worksheet as a file they can fill in, with the pricing page linked so they can add the platform fee themselves.
- Attended without clicking. Send the short clip that answers the question they asked or stayed for, usually the deliverability answers or the demo, with your link under it.
- Registered but didn't attend. Send the replay, labelled as a replay, with timestamps so they can jump to the model and the demo.
Send a second email to each group four or five days later. For clickers, offer to answer one more question. For the other two, share one short takeaway from Q&A. It's the same logic agencies use with their own clients, and we've written up building audience segments from campaign interaction history if you want the method in more detail.
What you should see is a second wave of clicks in the first week, often from people who watched the replay at their desk without the pressure of a live chat. The mistake is sending one generic replay email to everyone and stopping there. The person who clicked during the demo doesn't need the replay, and the no-show doesn't know enough yet to want the worksheet.

How to tell the session worked, and what to change if it did not
Judge the session on four numbers, and give it the full 90 days. Agencies decide slowly. They talk to a partner, check their client list and price a test client before they commit. A session that looks flat on day one often shows its referrals in week six.
| Check | What it tells you |
|---|---|
| Registration-to-attendance rate | Whether your reminders and timing worked |
| Attendees still there after the demo | Whether the model held their attention |
| Clicks on your link, live and in follow-up | Whether the offer reached the right people |
| Referred agencies in your dashboard over 90 days | Whether the session actually sold the model |
When something's off, fix the part the symptom points to rather than rewriting the whole hour. Few registrations means the title or the promotion window is wrong, so rewrite the title around the agency's result and give it the full two to three weeks. Attendees leaving early means the opening runs too long, so move the demo sooner and cut the problem segment to five minutes. Clicks without sign-ups means the model wasn't clear enough, so spend more of the hour filling in the worksheet with an attendee's own figures.
Here's the one sentence to keep in mind for your next session. Agency owners don't buy software from a list, they buy a model they can watch working with their own numbers. Plan the hour around that, put your link where the questions get answered, and follow up with each group on its own terms. If you'd like the full details of what you earn first, read our review of the SendTo affiliate programme for agency content creators.
Get your link and run your first session in late September or October. You earn 20% of the partner subscription every referred agency pays SendTo, every month it pays.
Join the SendTo affiliate programme



