The SendTo client portal is the reporting screen your clients log in to, under your agency's name, to see what last month's emails did. Day to day it's calm to live with. A small business owner can read real human opens, clicks and bookings without a lesson. It suits agencies and freelancers on email retainers whose clients care more about appointments than about how many emails went out.
A retainer renews when the client can see what the work did. A spreadsheet of sends and delivery rates rarely shows that. A screen that says 31 people booked a consultation from Tuesday's email does. That's the case we're making for our own white label email reporting portal, and we'll make it with the downsides in plain view. Filtered numbers look lower in month one. Booking figures only mean something if you set them up before the first send. And the portal covers email only, so you still tell the story of everything else you do.
This is us reviewing our own feature in the week of 24 April 2024, using it the way an agency with a book of small business clients would. You'll get what setup is like, a script for the awkward first-month call, how bookings change the review meeting, what the partner view is like with twenty clients, and how one month's report becomes the next month's plan.
Setting up the portal under your own brand takes an afternoon, not a project
Our first setup took one afternoon. You add your logo and brand colours, and the portal your clients log in to carries your name, not ours. Then you invite a client by email. They set a password and land on their own campaigns, with opens, clicks and bookings for each send. That answers the question we hear most from partners. Your client sees your brand in the portal, and SendTo stays in the background.
The partner view sits beside it. Every client you've invited shows up there, with the same figures the client sees. You aren't keeping one version of the truth for yourself and a tidied version for them. That matters on a call, because you're both looking at the same numbers.
Compare that with the monthly report built by hand. You export a file from the sending tool, paste it into a spreadsheet, build two charts, drop them into a slide deck and write three bullet points of commentary. Done properly, that's a couple of hours per client per month. With fifteen clients it eats most of a week, and the deck is out of date the moment the next campaign goes out. The portal updates as results come in, so the report is ready whenever the client looks.
Will clients understand it without you walking them through it? Mostly, yes. Opens, clicks and bookings are words they already use. We'd still book a fifteen-minute walkthrough for the first login. Not because the screen is hard to read, but because that call is where you set expectations for the next section.
Human-only opens make the first report look worse and every report after it more believable
Here's the weakness we'd rather you heard from us first. When a campaign lands in a business inbox, security software often opens it and checks every link before a person ever sees it. Plenty of tools count that as an open. Our reports leave those scanner opens out, so the opens you see are real human opens.
The result is a lower open rate than the client is used to. A client who saw 48% in their old tool might see 29% in month one with us. Nothing got worse. The old figure was padded with machines, and the new one counts people. We've written up the mechanics in more detail in our piece on how security scanners skew email open metrics, which is worth sending to any client who wants the technical version.
The payoff comes from month two onwards. A filtered open rate moves when the subject line or the timing changes, so it becomes a number you can act on. Click figures get cleaner too, because a scanner checking every link isn't counted as a reader who clicked.
How to explain a lower open rate without losing the client
Keep it short and say it in the onboarding call, before the first send. Here's the version our partners use, word for word if you like.
- "Your new reports only count opens by real people, so the open rate will look lower than you're used to."
- "Your old figure included security software that opens every email automatically, which made it look higher than it was."
- "From now on, when this number goes up, it's because more of your customers read the email."
- "The figures I'll judge us on are clicks and bookings, because those are the ones that turn into revenue for you."
Bookings are the figure that keeps a retainer, so set them up before the first send
Opens and clicks tell you the email worked. Bookings tell the client the money worked. When the report shows appointments next to each campaign, the review call stops being about percentages and starts being about diary slots filled.
Take Priya, a freelance marketer who runs email for a dental practice in Leeds. Her old reports led with a 41% open rate, and the practice owner nodded politely. Her first SendTo report showed a 26% human open rate, 212 clicks and 14 check-up bookings from one recall email. The owner didn't ask about the open rate once. He asked whether she could send the same email to patients who hadn't been in for two years.
That's how retainers get renewed. The client doesn't renew for activity, they renew for a figure they can connect to their own till. If you're working out how to price and protect that monthly fee, our guide to retainer strategy goes into the structure. The short version is that bookings give you a number to defend.
The honest catch is that the bookings figure only means something if booking links are in the campaigns from day one. A report can't count appointments from emails that never carried a booking link, and you can't go back and add them to campaigns that have already gone out. If you start in month three, the first two months show nothing, and that empty column is the first thing a sceptical client notices.
The partner view is where an agency with twenty clients actually works
Twenty clients means twenty sets of numbers, and the partner view puts them on one screen. Clicks, bookings and variations show there for every client, the same figures each client sees in their own portal. You check the whole book in a few minutes on a Monday morning.
The real value is seeing trouble before the client does. When a florist's clicks fall three campaigns in a row, you spot it in the partner view and arrive at the next call with a plan, rather than hearing about it from an unhappy owner. Be clear about what it doesn't do, though. It shows you the figures. It doesn't phone you when one drops. Someone at your agency still has to look, so put a weekly check in the diary.
Compare that with running clients through a self-serve email tool, where each client has their own account. You log in twenty times, chase twenty sets of two-factor codes and pull twenty exports before you can see the picture. Preparing for a review call means opening that one account, finding the right campaigns and rebuilding last month's view. In the partner view, review prep is opening the client and reading what's already there.
Variations and segments turn this month's report into next month's plan
A report that only looks back is a receipt. The variation results in the portal show which version of a campaign won, say the subject line with the price against the one with the question. The client sees the winner, and you've already got the brief for the next send.
Segments do the rest. From any past campaign you build an audience of people who clicked, people who opened but didn't click, or people who didn't open at all. Each one goes straight back into the next campaign with a message that fits. Clickers get the offer again with a deadline. Openers who didn't click get a shorter email with one clear button. Non-openers get a new subject line on another day. We've set out the method step by step in our guide to segments based on campaign interaction history.
Put the two together on a review call and the client sees cause and effect. Here's what won, here's who didn't respond, and here's what we're sending them next. That's a plan they can say yes to before the call ends.
A white label email reporting portal only covers email, and that is its real limit
The portal reports on what SendTo sends. That's opens by real people, clicks, bookings and variation results for every campaign, and nothing else. It doesn't pull in paid search spend, social reach, organic rankings or the figures from a client's till. If you run a café's ads and email together, the portal shows the email half. The ads stay in their own tool.
We think that's the right call for a white label email reporting portal. It keeps the screen readable for a business owner who has five minutes between customers. But if you sell several channels, it leaves a gap. A client paying you for ads, social and email wants one picture of the month, and three logins don't give them that. You've got two honest options. You can use an all-channel dashboard tool that collects data from each platform, or you can write a combined monthly summary that puts the headline figures side by side.
For an agency with three or four clients on mixed retainers, the summary is usually enough. One page per client works well. Put the bookings figure from the portal first, then cost per lead from paid search, then one line on social. Send it as a short email with the portal link at the bottom, so the client can check the detail themselves. That's also our answer when partners ask how to send reports through email. Write the story in the email and let the portal carry the numbers.
Past about ten mixed-channel clients, a dashboard tool starts paying for itself in saved hours. The cost is another subscription and another set of connections that break when a platform changes its login. Neither option is free. The portal won't tell the multi-channel story for you, and we'd rather you knew that before you sign up than after.
Deliverability stays out of the client's sight, and the numbers are cleaner for it
Your client never sees a warmup schedule. They never see a bounce queue or a sending domain either. Here's what we handle behind the portal, and why it matters for the figures they do see.
- Address checks before sending, so dead and risky addresses come off the list before a campaign goes out.
- Automated warmup on new sending domains, so a new client's first send doesn't arrive from a domain mailbox providers have never seen.
- Per-provider and per-domain pacing, so dispatch speed suits each mailbox provider and a large send doesn't arrive at once.
- Volume spread across several brand-matched sending domains, so no single domain carries the full load.
Each of those makes the report more honest. A list full of dead addresses drags click rates down and makes a decent campaign look weak. Checking addresses first means the click and booking figures in the portal come from people who could actually receive the email. The same goes for the spread across domains. If you want the mechanics, our piece on multi-domain distribution explains how sharing the load protects a client's main domain on big sends.
This is current news, not theory. In February 2024 the largest mailbox providers started enforcing new bulk sender rules. Senders now need authenticated domains, complaint rates kept low, and one-click unsubscribe for bulk mail, with the unsubscribe requirement due to be enforced from June. Partners keep asking which of the big email providers matter most. For a typical small business list, a handful of consumer and business mailbox providers hold the large majority of addresses, and those are the providers the new rules come from. That's why our pacing works provider by provider.
The limit is just as plain. We handle the sending side, but we can't make a client's list consented if it wasn't. If a client hands you a bought spreadsheet, address checks will remove the dead entries and leave the legal problem in place. On B2B cold email, UK rules allow some approaches to business addresses under legitimate interests with a clear opt-out. Get proper advice for each client's situation, though. The portal reports what happened. Whether the client was allowed to send it is a question to settle before you press send.
The portal comes with the flat partner fee, not as a paid extra
Reporting isn't an add-on. The client portal and the partner view are part of the platform you get for the flat partner fee, alongside campaigns, landing pages, sequences and list cleaning. You don't pay more per client to switch on reports, and nothing gets held back for a higher tier.
The money works in two layers. You set the monthly fee your client pays you, at whatever price fits your market. Your client then buys their own usage on top. So a busy florist sending twice a week pays for that volume, and a quiet accountant sending once a month doesn't pay for the florist. Your margin is the gap between the fee you charge and the flat fee you pay us. That's the answer to the question of what white labelling costs. The software cost to you stays the same, and what you charge is up to you.
We won't put figures here, because prices change and this article won't. You'll find the current partner fee on our pricing page. If you're weighing this against tools that bill you per client or per contact, our piece on flat-fee software models explains why more agencies are moving that way and where the model costs you more.
Who should buy it and who should look elsewhere
Buy it if you run email on retainer for small business clients who count appointments. Dental practices, salons, physios, garages, letting agents and trades who take bookings all fit. So do freelancers with a handful of those clients who want a reporting screen with their own name on it rather than a monthly slide deck. The bookings figure, the human-only opens and the partner view are built for exactly that review call.
Look elsewhere if reporting across many channels is your main need. An agency whose retainers are mostly paid search and social, with email as a small extra, will get more from an all-channel dashboard tool. The portal won't show those channels at all. And if you're a single business sending your own newsletter with no clients to report to, a self-serve email tool is enough. You'd be paying for a white-label layer you don't need.
The third group is affiliates. If you write about agency software, review white-label tools or advise agencies on their stack, SendTo is a natural thing to recommend. The readers who'll get the most from it are the agency owners above. You earn 20% of the partner subscription each agency you refer pays us, every month they keep paying it. That's 20% of the platform fee only, never a share of what the agency's own clients pay the agency. Attribution lasts 90 days from the first click, the first touch wins, and we pay commission monthly by PayPal.
Write for agency owners? Join our affiliate programme and earn 20% of the partner subscription of every agency you refer, for as long as they pay it.
Join the SendTo affiliate programmeVerdict
Branded reporting on its own won't hold a retainer. Branded reporting that counts real human opens and puts bookings next to every campaign is a different thing. It gives a business owner a figure they can connect to their diary and their takings. Is that enough to justify a monthly fee? For small business clients who take appointments, yes. The partner view makes it practical across twenty clients, and the deliverability work keeps the numbers clean without the client ever seeing it.
Two conditions apply. Put booking links in every campaign from the first send, and warn clients about the lower open rate before they see it. Then accept that the portal covers email only, so you still tell the story of your other channels yourself. Do both and the portal will carry the review call for you. Skip them and you'll spend that call explaining an empty bookings column.


