SendTo is an email marketing platform you run under your own agency's name. Living with it feels like owning a finished product that your clients buy from you, while the sending, domain warmup and address checks run behind it where your clients never see them. It suits agencies that already have retainer clients and want email to become a monthly line on every invoice. We should say this up front: this is SendTo reviewing its own platform. We know that's a reason to read us sceptically, so we've put each weakness in the section where it bites, stated as plainly as the strengths.
Here's the argument of this SendTo review of our white label email platform. If you already have a handful of retainer clients and you want to sell email as your own product without building or babysitting sending infrastructure, it's worth it. Deliverability and reporting are handled well enough that you sell results, not server maintenance. The trade-offs are real, though. You pay a flat fee before a single client signs. The AI design is only as good as the brand presets you feed it. Support and strategy stay your job. And if you're a solo business that wants one account, or an agency with one or two clients, a standard single-brand email tool will serve you better.
We're writing this in the week of 18 May 2024. May is a sensible month to read it, because interest in email marketing bottoms out in June and peaks in November, December and January. Set up now and your clients' sending domains are warmed and trusted long before the busy season arrives. Below you'll find what setup takes, what the AI production and reviewer are like in daily use, how deliverability works, what lists and forms cover, and then reporting, billing and who should buy it.

Our SendTo review of the white label email platform starts with setup, because branding the portal takes an afternoon and the domains take longer
Branding is the quick part. You add your agency name, logo and colours, and the client portal and billing your clients see carry your brand rather than ours. That answers the first question agencies ask us, which is whether they can sell SendTo as their own product. Yes. Your client logs in to your portal, gets billed by you, and reads reports with your name on them. Plan on an afternoon to get it looking right, mostly spent fussing over logo sizes and colour contrast.
Adding your first client is quick too. You create the client, set their brand presets (more on those below) and connect their sending domains. That last step is where time goes. Each domain needs DNS records added at the client's registrar, and that means chasing whoever holds the login. For a small business client, it's often a nephew who built the website in 2019. We've watched a perfectly ready account sit idle for four days waiting for one TXT record.
Then warmup starts. SendTo applies automated warmup to every new sending domain, raising volume gradually so mailbox providers learn to trust it. You don't manage the schedule, but you can't skip it either. A client who wants to blast 20,000 contacts next Tuesday from a domain that's never sent mail is going to hear "not yet" from you. Build that into the onboarding promise you make, and it stops being a surprise.
Brand presets are the setup step that decides everything after it
Presets hold the client's logo, colours, fonts, tone of voice and footer details, including the postal address and the unsubscribe wording. Every AI-designed email reads from them. Ten minutes spent here gives you ten minutes of output quality. Give it an hour and the output looks like that client's brand.
When output looks generic, a thin preset is the usual cause. A tone field that says "friendly and professional" describes every business on earth. Write "warm, a bit cheeky, never uses jargon, signs off as the team at the bakery" and the drafts change character. Paste in two or three past emails the client liked as tone references. Set the footer once, correctly, and you never fix it campaign by campaign.
AI campaign production is fast enough to show a finished design on a first client call, but it still needs an editor's eye
You write a campaign brief, and SendTo designs a full HTML email from it and the client's presets in seconds. Not a wireframe, a finished, mobile-ready email with the client's logo, colours and a draft of the copy. One-click remix gives you a different take on the same brief, so you can try a bolder header, a different layout or a shorter version without starting again.
Speed in sales conversations surprised us most. Kate, who runs a two-person agency in Bristol, briefs a spring offer for a prospect's garden centre while they're still talking on the call, remixes it twice, and shares her screen. The prospect stops asking what email marketing would look like for them, because they're looking at it. If you want the method behind that, we've written up how to pitch finished email campaign designs on a first call.
Now the weakness. Is the first draft good enough to show without reworking? For a sales call, usually yes, because you're showing a direction. For a live send, no. A one-line brief like "promote our sale" gets you a competent, forgettable email with a sale banner and three generic paragraphs. The AI doesn't know the sale is the client's first in six years, or that their regulars hate the word "deal". Put those facts in the brief and the draft improves sharply. Even then, a human should read the copy, sharpen the subject line and check every claim before it goes out. You're still the editor. The platform saves you the design hours, not the judgement.
The built-in AI reviewer catches the careless mistakes, not the strategic ones
Before a campaign launches, SendTo's embedded AI reviewer checks the subject line, the structure, the language, the links, how well the email matches its brief, and basic compliance points. In practice it flags things like a broken link to last month's offer page, a subject line that promises something the body never mentions, a missing unsubscribe link, or copy that drifted away from the brief during editing. These are the mistakes that slip through on a Friday afternoon when a junior is sending their fourth campaign of the day.
For agencies with a few people sending, that consistency matters more than any single catch. Every campaign passes the same checks regardless of who built it, which is why an AI reviewer standardises quality control across agency teams better than a checklist pinned to the wall.
What the reviewer won't tell you is whether the campaign is a good idea. It won't say that emailing a discount to customers who bought at full price yesterday will annoy them, or that the offer is too weak to move anyone. Strategy stays with you.
Deliverability is the main reason to choose SendTo, because the agency never has to run the plumbing
Four things run on every send without you touching them. Addresses are verified before sending, so dead and mistyped ones never get mailed. New sending domains get automated warmup. Dispatch speed is governed per mailbox provider and per domain, so a big send doesn't hit one provider all at once. And campaign volume is spread across several brand-matched sending domains, so no single domain carries the full load.
That last point raises a fair question. Why do messages go out from secondary domains, and does it hurt the client's brand? The domains are brand-matched, so the client's name is still what recipients see, and replies still reach the client. What changes is risk. If one domain takes a reputation hit, the client's main domain, the one their staff use for invoices and quotes, is untouched, and the other sending domains keep working. We cover the mechanics of spreading volume across multiple domains separately.
Compare it with the alternatives. Running separate accounts per client on a general email tool means a dozen logins, a dozen bills and a dozen warmups you manage by hand. Self-hosting your own mail server gives you full control and full responsibility, from blocklist monitoring to rate limits, and it becomes a second job. Building in-house costs more than either. SendTo's case is that you skip all of that and sell the outcome.
The trade-off is that you hand over control. You don't set your own warmup curve or tune send speeds per provider yourself. If you enjoy that work and do it well, a self-hosted setup or a raw sending service will suit you better. We think it's the wrong job for an agency selling marketing, but it's a real choice.
Lists, forms and segments cover the essentials well, with imports that survive a dropped connection
Imports are better than we expected them to be. Drop in a client's spreadsheet and SendTo maps the columns automatically, so "E-mail Address", "Email" and "email_1" all land in the right field. If the connection drops halfway through a 40,000-row upload, the import resumes from where it stopped instead of starting over or leaving half a list behind. Suppression applies across the whole platform, so an address that unsubscribed or bounced stays suppressed and doesn't sneak back in through the next spreadsheet.
Is list cleaning legitimate, or a grey area? It's legitimate. Verification checks that addresses on a list the client already owns are real and deliverable. It isn't buying data, and it doesn't add anyone to a list. Mailing dead addresses damages sender reputation for everyone on that domain, so removing them first is ordinary good practice.
Signup forms are protected against bots and come in two forms. You can embed them on a client's website or host them on a SendTo landing page. Double opt-in is optional, which we like, because it suits some clients and not others. A B2B consultancy collecting a few sign-ups a week loses little by asking for confirmation, while a busy retail promotion loses real sign-ups to every extra step.
Segments are built from past campaign behaviour. You can target people who clicked, people who opened but didn't click, or people who never opened. That covers the follow-ups agencies run every week, such as resending to non-openers with a new subject line or sending a stronger offer to openers who didn't click.
Client reporting is more honest than most because it filters out security scanner opens
Open rates have been inflated for years, and not by people. Corporate mail gateways and security tools open incoming emails to check links and images before a human ever sees them. When a scanner loads the email, it loads the tracking pixel too, and the send logs an open. It often happens within seconds of delivery, at a speed no reader manages. A B2B client mailing office addresses gets hit hardest, because those inboxes sit behind the strictest filters. We've written about how security scanners skew open metrics in more detail, but the short version is simple. Some of the opens your clients have been celebrating were software.
SendTo's reports leave scanner opens out, so the opens you see are human ones. Alongside them sit clicks, bookings and the results of each variant, so you can see which subject line or layout won with real readers. Reading a report on a B2B send felt different the first time. The open curve no longer had that sharp spike in the first minute followed by a slow trickle. It looked like people opening email over coffee, through lunch and on the train home.

Your client sees their portal, and you see every client at once
Reporting comes in two views. Your client logs in to their own portal, under your brand, and sees their campaigns, their opens, clicks, bookings and variants. You get the partner view, which shows every client side by side. That second view is the one we used most. On a Monday morning you can spot the client whose clicks dropped last week before they ring you about it, and you walk into the call with a plan instead of an apology.
Now the trade-off, and it's a real one. Open rates in SendTo look lower than many clients are used to. Priya, who runs a six-person accountancy practice and buys email from a consultant we work with, had seen opens near 48% on her old tool. Her first SendTo report showed 29%. Her clicks were the same as before and her bookings were up, but the headline number fell, and her first question was what had gone wrong. Nothing had. The old figure counted machines.
The flat-fee billing model rewards agencies with several clients and punishes those with one
Billing has three parts. You pay SendTo one flat partner fee. You set your own monthly subscription price for each client, at whatever level your market supports. Your clients then buy their own sending usage on top, through billing that carries your brand. You never resell our invoice with a markup, and your clients never see our name on a bill. Current partner fees are on the pricing page, and we'd rather you read them there than in an article that will outlive them.
The model makes sense once you've lived with the alternative. Running separate accounts on general email tools means one bill per client, each one growing as their list grows, and a margin that shrinks every time a client succeeds. With a flat fee, your cost stays put while each new client adds revenue. That's the reason behind the shift from per-client usage fees to flat-fee software models across the agency world. Usage is the client's cost, the platform is yours, and your price covers your work and your margin.
Tom runs a small agency in Leeds with nine retainer clients, mostly trades and local retailers. He moved them onto SendTo over a fortnight in March and added email as its own line on each monthly invoice. One flat fee spread across nine clients is a small share each. For him, the maths worked in the first month.
Here's the weakness. You pay the fee before a single client signs. If you sign up with one client and a hopeful pipeline, that one client carries the whole fee, and every month the pipeline stays hopeful is a month you pay for capacity you aren't using. Is it worth it with one or two clients? Usually not. You'd be better off putting that client on a standard email tool in their own name and coming back when you have four or five clients ready to move.
Who should buy SendTo, and who should look elsewhere
SendTo suits agencies and consultants who already have several retainer clients and want email to become recurring platform revenue under their own name. If you're already advising clients on email, or doing it by hand inside their own accounts, you're the buyer we built it for. It also suits a freelance marketer ready to treat email as a product with a price, rather than hours billed per campaign. The common thread is clients you already have. SendTo turns an existing relationship into a monthly subscription. It doesn't find those clients for you.
Look elsewhere in these cases, and here's what to get instead.
- A small business running its own marketing needs one account, one brand and no reselling. A standard single-brand email tool is simpler and costs less.
- An agency with one client pays the flat fee for one client. Put that client on a general email tool in their own name until more clients are ready.
- A team that wants to run its own servers and enjoys tuning warmup curves and watching blocklists should self-host or use a raw sending service. SendTo hands that control over by design.
- Anyone needing heavy CRM pipelines or e-commerce automation driven by purchase data should pick a dedicated tool built for that. SendTo's segments come from past campaign behaviour, not shop orders.
On the mail server question, our view is plain. Self-hosting gives you control and a second job. You own every bounce, every blocklist listing and every rate limit, and when a client's send goes wrong at 9pm, it's your phone that rings. If deliverability is the thing you sell, that's fine. If marketing is the thing you sell, we think it's time spent on the wrong work.
Two jobs stay yours whichever way you go. Support is one. Your clients ring you, not us, because the product carries your name. Strategy is the other. The platform designs, checks, sends and reports. It doesn't decide what a client should offer or whether their list has valid consent.
Verdict
For an agency with retainer clients, SendTo is strong where it counts. Deliverability runs without you, with address checks, warmup, per-provider send speeds and volume spread across brand-matched domains. AI production is fast enough to put a finished design in front of a prospect while they're still on the call. Reporting is honest, because it counts people instead of scanners. Your brand is on the portal and the bills, and the prices are yours to set. Sell email as your own product without running servers, and that's what you get.
It's weaker wherever your own work is needed, and we'd rather you hear that from us now than find it in month two. Output is only as good as the brand presets you write. Domain setup and warmup take days, not minutes. Open rates look lower than clients expect until you explain why. Compliance judgement and strategy stay with you. And the flat fee arrives before the clients do, so with one or two clients it's the wrong buy. With five or more, set up in May, the domains are warm by the time November's rush starts.
If you don't run an agency but know agency owners who'd fit this description, you can recommend SendTo instead. As an affiliate, you earn 20% of the partner subscription each agency you refer pays SendTo, every month that agency pays it. It's never a share of what the agency's own customers pay them. Attribution lasts 90 days from the first click, the first touch wins, and commission is paid monthly by PayPal.
Know agencies with retainer clients who'd sell email as their own product? Get your referral link and earn 20% of their partner subscription every month they pay it.
Join the SendTo affiliate programme
