Affiliate marketing tips

SendTo's Client Portal Reports Reviewed: What Affiliates Can Show Agency Prospects

SendTo's client portal reports leave out security scanner opens, so the numbers run lower and clients believe them. Here's what affiliates can show agency owners.

a person typing on a laptop
Photo by GRIN

SendTo's client portal reports show an agency's client the human opens, clicks, bookings and test variations from their campaigns, with the opens that security scanners trigger taken out. Using them every day feels calm and a little humbling, because the open rate is lower than you're used to seeing. They suit agency owners who want a report their client will believe, and the affiliates who put those reports in front of agency owners.

This sendto client portal review makes one argument. The reports are convincing because of what they leave out. When a figure isn't padded by software opening emails on a person's behalf, the client stops arguing with it and starts acting on it. For an affiliate, that changes what you show. Clicks and bookings carry the case. The human-open filter is your reason for the prospect to trust the rest. And you have to be straight that a report is only as strong as the sending history behind it.

Below you'll find what the screens show, what reading them is like, where they fall short, and how each part turns into content an agency owner believes. We're writing this in the week of 26 July 2026. Summer is the quiet stretch for email, and agencies are starting to plan the November and December sends their clients lean on most. That makes now a good time to build the content they'll find when they start looking.

Leaving out scanner opens makes SendTo's reports lower, and more believable

A person isn't always the first to open an email. When a message reaches a company inbox, a security gateway often gets there first. It fetches the images and follows the links to check for anything harmful before the message is delivered. Open tracking works by loading a tiny image, so that check registers as an open. Nobody has read a word, and the report already says they did.

Mail apps with privacy features add to this. Some load every image in advance on the reader's behalf, which again fires the tracking image whether or not anyone looks. A general sending tool that counts raw opens adds all of these together. The result is an open rate that looks healthy and tells the client very little.

SendTo filters out the scanner opens before the figure reaches the report. What's left is our best count of people who opened the email. In practice that number comes in lower than the one an agency's client is used to from their old tool. The first time we showed a client a human-open rate several points under their previous figure, the conversation turned out better than we expected. We explained the scanner check in two sentences, and they understood it straight away. After that, they trusted the click and booking numbers next to it, because the report had already shown it wasn't trying to flatter them.

That's the point worth carrying into any sendto client portal review you write yourself. The filter isn't a feature to list. It's the reason the rest of the report reads as true.

Clicks and bookings carry the argument that opens cannot

A click means someone wanted more. A booking means someone took the slot. Those are the two figures an agency's client acts on, and they're the ones we read first every time we open a client's report in the portal.

Bookings matter most to a small business owner because they need no translation. Take a physiotherapy clinic with 1,800 contacts that sends a spring reminder. The report shows 212 clicks and 37 bookings. The owner doesn't need to know what a click-through rate is. They know what 37 appointments are worth to them, and that's the moment email stops being a line item they question at renewal.

Reading these in the portal is quick. Each campaign carries its human opens, clicks and bookings together, so you see the drop from interest to action in one view. There's no second tool to open and nothing to reconcile.

The old way is a spreadsheet built by hand every month

Without a client report, an agency exports campaign data to a spreadsheet, matches it against bookings from a separate calendar, builds a chart, then pastes it into a slide deck. For one client that's an hour. For twelve retainers it's a working day each month, and every copy-paste step is a chance to put last month's number in this month's deck. A hand-built report also carries the raw open figure from the export, scanner opens and all, unless someone strips them out manually. Nobody does.

If you'd like that running order in more detail, how to structure video demos for agency email platforms walks through it step by step, with the report arriving as the answer to the question every agency owner asks, which is whether their client will trust the numbers.

Variation reporting turns 'we tested it' into something a client can see

An account manager saying a test was run is a claim. A report showing two subject lines side by side, with the human opens and clicks for each, is evidence. That difference decides a lot of client calls.

In SendTo the variations appear in the campaign report, each with its own figures, so the client sees which version won and by how much. We've watched this settle arguments that would otherwise drag on. A client who insists their name belongs in the subject line can look at the version with it and the version without it, and the call moves on to what to try next. The agency gets credit for the testing, because the client can see the work, not just hear about it.

There's a real limit here, and it's about list size. Split a list of 600 contacts two ways and each version goes to 300 people. If one version gets 14 clicks and the other gets 10, that gap is noise. Send the same test next week and the result could flip. The report will still show a winner, because it shows the figures it has, but the figures don't prove much at that size.

The client portal and the partner view show the right numbers to the right people

There are two views, and they're kept apart on purpose. The client portal shows one client their own campaigns, their own human opens, clicks, bookings and variations, under the agency's brand. The partner view shows the agency every client side by side. Both carry the agency's name, not ours.

Day to day, that split is what makes running many retainers manageable. On a Monday morning an agency with fifteen clients opens the partner view and sees which accounts sent last week, which ones drew bookings and which ones went quiet. A client who went three weeks without a send shows up before they raise it at their monthly review. Meanwhile each client logs into a portal with their agency's logo on it and sees only their own business. No client ever sees another client's results, and no client has to be walked through a dashboard built for someone else.

Compare that with handing a client a login to a third-party sending tool. They see another company's brand, another company's upgrade prompts, and sometimes settings they shouldn't touch. Some will start to wonder what they're paying the agency for, given the tool has its own name on it. With SendTo the portal is the agency's product, so the report strengthens the agency's position every time the client opens it. We've seen affiliates build whole content series around this one idea. One of them is in our story of a creator who built a recurring commission stream pitching client portals.

Segments built from past reports close the loop between reporting and the next send

A report that ends at the numbers leaves the agency with a question about what to do next. SendTo answers it by letting you build audience segments straight from past campaigns. There are three that earn their keep.

  • Clickers: people who clicked a link in a past campaign, ready for a direct offer or a booking reminder.
  • Opened but didn't click: people who read the email and didn't act, worth a second message with a different angle or a clearer button.
  • Non-openers: people who didn't open at all, worth a new subject line, or a decision to stop mailing them before they drag the list down.

This is where a report becomes paid work. An agency can look at a client's spring campaign, see 400 people who opened and didn't click, and propose a follow-up to just that group. That's a concrete piece of work with a clear reason behind it, and it's easy for a small business owner to say yes to. Over a year, those follow-ups turn a single monthly send into a steady run of targeted ones, which is exactly the kind of work that keeps a retainer renewing.

The human-open filter matters again here. A segment of people who opened but didn't click is only useful if they really opened. In a tool that counts scanner opens, that segment fills up with company addresses whose security gateway loaded the email and nothing else. You'd be sending your follow-up to software. Because SendTo builds the segment from human opens, the follow-up goes to people who actually read the first email.

The fair caveat is timing. Segments work best once a client has several campaigns behind them. After one send, the clickers group is small and the non-openers group is everyone who didn't open a single email, which doesn't tell you much. After four or five sends, the groups settle into patterns you can act on. Tell agency prospects to expect that, so they don't judge the feature after one campaign.

Clean data starts before the report: verification, warmup and spread domains

A report only counts the emails that reached someone. If a third of a list bounced or landed in spam, a low click rate says nothing about the email itself. The real problem was delivery, and the report would show it as weak copy. Four checks run before a SendTo campaign leaves, and each one keeps the figures in the report tied to real people reading real emails.

  • Verification: every address is checked before sending, so dead and mistyped addresses come out of the send instead of dragging down the click rate.
  • Warmup: a new sending domain starts on low volume that rises over time, so a new client's first campaign doesn't vanish into spam folders and come back with figures near zero.
  • Per-provider dispatch speeds: sending is paced for each mailbox provider and domain, so one provider doesn't slow or reject a burst of mail halfway through a campaign.
  • Spread across brand-matched domains: campaign volume goes out across several sending domains that match the agency's or client's brand, so no single domain carries the full load.

Secondary domains protect the address a business can't afford to lose

People ask why companies send marketing from a domain that isn't their main one. It's about protection. A business's main domain carries its invoices, its staff email and its customer replies. If a marketing send draws complaints, the damage stays on a sending domain and doesn't hit the address the accounts team uses. Spreading volume across several brand-matched domains also means recipients still see a name they recognise. For the report, it means the figures come from mail that was actually delivered, so you can read a low click rate as a content signal and act on it.

A new account's reports look thin, and affiliates should plan around that

This is the biggest weakness, so here it is up front. A fresh demo account has nothing to show. No campaigns have run, so there are no human opens, no clicks, no bookings, no variations and no segments worth building. The portal looks tidy and empty. You can't screenshot a booking line that doesn't exist yet, and an agency owner watching a demo full of zeros won't fill in the gaps for you.

The second problem is harder to spot. Put a SendTo report next to a general sending tool that counts raw opens and the honest figure looks worse. A similar send to a similar list might show 46% opens in the raw-open tool and 31% human opens in SendTo. An agency owner skimming a comparison sees the smaller number and decides the platform delivers worse. Nothing in the screenshot tells them the bigger figure includes security gateways and image preloading. If you don't explain that, the strongest point in this review counts against you.

There are two fixes, and both are simple. First, build your demo content from a sending history. Run real campaigns to a real, opted-in list, such as your own newsletter or a small audience you already mail, for several weeks before you record anything. Four sends over six weeks gives you clicks to point at, a variation or two and segments with people in them. Second, explain the scanner filter before you show any number. One line does it: "Security gateways open business email before a person does, and this report takes those opens out, so the figure is lower and it's real." Once a prospect has heard that, the 31% reads as honest instead of weak.

Timing helps here. In late July, email interest is at its lowest point of the year, and agencies are starting to plan the November and December sends their clients rely on. Start your demo sending history now and you'll have eight to ten weeks of real figures by the time those agency owners start searching.

How to turn the portal into affiliate content agency owners believe

Order matters more than polish. Each screen you show answers a doubt, and the doubts come in a set order. Show the filter first, because it earns trust for every number after it. Then show what the client acts on. Then show proof that the agency did the work. Then show how the report turns into the next paid job. Change the order and you'll be showing a click figure to someone who's still wondering why the open rate looks low.

  1. The filter: explain scanner opens in two sentences, then show the human-open figure as the honest baseline.
  2. Clicks and bookings: point at the booking line and say what it means in appointments or sales for the client.
  3. Variations: show a test from a list of a few thousand contacts, with both versions' figures on screen.
  4. Segments: build an opened-but-didn't-click segment from that same campaign and describe the follow-up an agency would sell.

That sequence works in any format. In video walkthroughs, it becomes the running order, with the filter explained in the first minute and the segment built live at the end. In comparison charts, it decides how you label the rows. And in product teardowns, it gives you a structure. Take each screen in turn, say what it shows, what it leaves out and why that matters to an agency's client.

Show the client portal with a demo agency's logo on it, never ours, because the white-label brand is half the point. Keep the partner view to sample client names. And when you're writing your own sendto client portal review, put the limits in too, meaning thin new accounts, opens that are still estimates and small-list tests. Agency owners trust a reviewer who names the catch before they find it.

Who should promote it, and who should look elsewhere

Promote it if your audience runs agencies on monthly retainers, sells email marketing to small businesses, or works with clients who doubt their marketing figures. Those readers have a client on the other end who asks what the email did. A branded portal showing human opens, clicks and bookings answers that question every month without anyone building a spreadsheet. Freelance marketers and consultants who already advise small businesses on email fit too, because the reports turn advice into something a client can see.

Look elsewhere if your readers are solo creators sending their own newsletter. They don't have clients, so they don't need a client portal, a partner view or white-label reports, and paying for an agency platform would be paying for parts they'll never open. A single-brand newsletter tool suits them better. It's built for one sender, one list and one brand, and that's all they need.

Here are the terms, exactly as they stand. You earn 20% of the partner subscription each agency you refer pays SendTo, every month that agency keeps paying it. You never earn a share of what the agency's own clients pay the agency. Attribution lasts 90 days from the first click, and the first touch wins. Commission is paid monthly, by PayPal. What you earn depends on the agencies you refer and how long they stay, so we don't promise any figure. For what the platform costs an agency, send your readers to the pricing page rather than quoting a number that could change after you publish.

Verdict

SendTo's client portal reports win because they're honest. Leaving out scanner opens makes the open rate lower, and that lower figure gives the clicks, bookings, variations and segments around it their credibility. For an affiliate, that honesty is the selling point. Lead with the filter, follow with bookings, and an agency owner sees a report their own clients will believe.

The real catch is that it takes sending history to show it off. A new account looks empty, and an honest figure placed next to an inflated one looks worse unless you explain the difference first. Start a real sending history this summer, explain the filter before any number, and you'll have content ready for the agencies planning their busiest season.

Refer agencies to SendTo and earn 20% of the partner subscription they pay, every month they pay it, paid monthly by PayPal.

Join the SendTo affiliate programme

Frequently asked questions

Why are SendTo's human open rates lower than the ones my old tool showed?

Your old tool counted the opens that security gateways and privacy features trigger when they load images. SendTo filters scanner opens out, so the figure drops a few points. That's not a problem. It's the reason clients trust the clicks and bookings next to it.

How accurate are open rates now that scanners and privacy features open emails automatically?

They're still an estimate. Filtering scanner opens removes the biggest source of inflation, but some real opens go unrecorded and some automated ones still look human. Read opens as a trend across campaigns, never as an exact headcount.

Will my client see SendTo's name when they log into the portal?

No. The client portal and the partner view both carry the agency's brand. Each client sees only their own campaigns, and the agency sees every client side by side in the partner view.

Can I build follow-up segments straight from report data?

Yes. You can segment clickers, people who opened but didn't click, and non-openers from past campaigns. Say 400 contacts opened and didn't click. That's a follow-up send with a clear reason behind it, and clients say yes to that kind of send.

Will a demo account have enough data for convincing screenshots or videos?

Not on day one. A new account's reports look thin until there's sending history behind them, so plan for that. Use a demo agency with sample client names, and only show variation tests from lists of a few thousand contacts or more.

Why does SendTo send from several domains instead of one?

Spreading volume across several brand-matched sending domains means no single domain carries the full load. That protects the address a business can't afford to lose. Address verification before sending and automated warmup on new domains back it up.

What do I earn as a SendTo affiliate, and for how long?

You earn 20% of the partner subscription each agency you refer pays SendTo, every month they pay it. You never get a share of what their clients pay them. Attribution lasts 90 days from the first click, first touch wins, and commission is paid monthly by PayPal.

What does the SendTo platform cost an agency?

Agencies pay one flat platform fee and set their own prices for their clients. Prices change and articles don't, so we don't quote figures here. Check the pricing page for current plans.

Earn 20% of what every partner you refer pays, every month.

Refer agencies, studios, consultants and resellers to SendTo. Your commission is 20% of the platform fee each partner pays, for as long as they pay it.

90-day attribution · Paid monthly by PayPal