When an agency owner asks whether their clients will believe the numbers, SendTo's client portal is the first screen we open. Using it feels like owning a reporting tool you never had to build. It suits agencies on monthly retainers who have to show clients what each month produced. This white label email client portal review comes from the demos we've run with it. It covers what an agency owner sees, how they react, and where you'll need to add a sentence of explanation.
Here's the argument. The portal reports real human opens, clicks and bookings, and it takes security scanner opens out before the client sees any figure. That's the proof an agency needs when a client asks what the retainer pays for. The portal also has three honest weak spots. Filtered open rates come out lower than clients are used to. A fresh account has no history to show. And a report can only be as good as the campaigns behind it.
Below you'll find setup, the number that persuades, the bookings conversation, segments and the partner view, each described as it looked on screen. We wrote this in the week of 24 January 2026.
As a white label email client portal, SendTo's takes an afternoon to brand, not a build
First question, every time: does the portal carry the agency's brand or ours? It carries the agency's. Their name, logo and colours go on the portal their clients log into. The client sees the agency's product, not a third-party tool with a logo pasted on top. For an agency charging a retainer, that's the difference between "we use some software" and "this is our platform".
Setting it up is a branding job. Nobody has to build anything. Compare that with what agencies do now. One option is an in-house dashboard, which means a developer, a reporting database and months of upkeep. The other is the usual stopgap, a monthly slide deck of screenshots from the sending tool and a spreadsheet export. The screenshots carry another company's name. The spreadsheet has to be rebuilt every month by hand. Neither gives the client anything to log into.
In a demo, speed is what counts. Within a few minutes the portal looks like the agency's own product. The AI designer then turns a short campaign brief and a brand preset into a finished HTML email in seconds, with one-click remix if the first version isn't right. So the agency owner sees their brand on the portal and a real campaign inside it before the call is half over. We've covered how to script that timed moment in our guide to structuring video demos for agency email platforms.
Filtered human opens are the most persuasive number on the screen
Security scanners open emails before people do. Corporate mail filters and some inbox privacy features fetch each message as it arrives, load the images (tracking pixel included) and sometimes follow every link to check it's safe. Each fetch registers as an open, and sometimes as a click too. Nobody has read anything yet. On a list with plenty of business addresses, that inflates open rates, and the client is shown readers who don't exist.
SendTo takes those scanner opens out before the number reaches the client portal. The open rate the client sees counts people, and the clicks are human clicks. Readers ask how the platform tells the two apart. Scanner activity leaves a different trace from human reading. It fires almost the moment a message lands, it comes from automated systems instead of a person's device, and it often hits every link at once. SendTo excludes that activity from the report, so the client sees what humans did.
How it played in a demo
Hannah runs a five-person agency handling email for local trades and clinics. When we showed her the filtered report, she went quiet, then said, "So the old forty percent was never forty percent." She'd suspected as much. One of her clients had a high open rate and almost no enquiries, and she'd never been able to explain the gap. A filtered figure that matched the click and booking numbers was the first report she'd seen that told a consistent story.
The downside is a lower number you have to explain
Be straight about this. Filtered open rates come out lower than the figures many clients are used to. A client who has seen inflated numbers from another tool for two years will read the drop as underperformance, unless someone tells them why first. That job falls to the agency, and your demo should prepare them for it.
There's a fair answer to the common question of how to track open rates accurately. Treat opens as a direction, not a score. Compare filtered figures with filtered figures over time, never with old exports. Then judge each campaign by clicks and bookings, because those are the actions that pay for the retainer.
Clicks and bookings turn an email report into a revenue conversation
Clients don't pay agencies for opens. They pay for enquiries, appointments and sales. An opens-only report keeps the retainer conversation stuck on activity, and once a client starts asking about activity, they start asking whether the retainer is worth it.
The portal shows clicks and bookings next to opens, which changes the question. A dental clinic's monthly report reads "312 people opened, 41 clicked through to book, 9 booked a check-up" instead of just a percentage. The agency owner can point at nine appointments and the conversation is about revenue. That's how an agency gets to justify a monthly retainer without a slide deck.
When you pitch, frame it around the client's question, not the feature. Ask the agency owner what their clients say when the invoice lands. If the answer is "what am I paying for?", the bookings row answers it. One caveat belongs here, and we come back to it later. Bookings only appear when booking is part of the campaign. A newsletter with no booking step will show opens and clicks, and nothing in the bookings column.
Segments from past campaigns give the agency its next pitch
Every retainer has a month where the client asks, "What do we do next?" If the agency has a specific answer, the client keeps paying. SendTo's segments supply that answer straight from the last campaign.
From any past campaign, the agency can build an audience segment from one of three groups.
- People who clicked, for a follow-up offer to the warmest contacts
- People who opened but didn't click, for a second message with a clearer reason to act
- People who didn't open, for a resend with a new subject line or a different angle
In a demo, show the segment builder straight after the bookings figure. The agency owner has just seen nine bookings. Now they see the 41 who clicked and didn't book, and the opened-but-didn't-click group, as ready-made audiences for next month. That's next month's campaign plan, and it took two clicks. To be clear about the limits, segments come from email behaviour in past campaigns. They don't pull in purchase data or activity from other channels.
The partner view is what agency owners ask about second
Once they've seen a client report, agency owners ask what they see themselves. Each client logs into their own branded portal and sees only their own campaigns, contacts and results. The agency gets a partner view across every client at once. That's what the agency sees and the client doesn't.
The difference is clearest at ten clients. Without one view, the owner logs into separate accounts or tools for each client, exports reports one at a time and pastes them into a spreadsheet to check which accounts are slipping. With the partner view, the owner sees all ten clients together. A client whose clicks have dropped stands out before that client's monthly call, not during it.
An owner of a ten-client agency told us the partner view was the moment the platform stopped feeling like a sending tool to her. It felt like the system she ran her business on. Each client has a portal that looks like the agency's product, and she has one screen that shows her the whole book of business.
The numbers hold up because of what runs behind the portal
A filtered report only persuades if the sending behind it is clean. Agency owners ask about this once they trust the open figure. If the email went to dead addresses or landed in spam, a perfectly honest report would still show a poor campaign. So here's what SendTo does before any number reaches the portal.
- Every address is verified before sending, and platform-wide suppression keeps unsubscribed and known-bad addresses off every list.
- New sending domains get automated warmup, so a client's first campaign doesn't go to the full list from a domain with no reputation.
- Dispatch speed is set per mailbox provider and per domain, so large sends don't flood any one inbox provider at once.
- Campaign volume is spread across several brand-matched sending domains, so no single domain carries the whole load.
Readers ask whether list cleaning is legitimate or just a way to hide bad numbers. It works the other way round. Verification takes out addresses that would bounce before you send to them. That protects the sending reputation, and it means every percentage in the report is worked out from real inboxes. Nothing is removed from the results after the campaign goes out. Imports work the same way. Spreadsheets map their columns automatically, uploads that get interrupted pick up where they stopped, and suppression applies straight away.
The other common question is why companies send from secondary domains instead of their main one. It's protection. If a marketing send picks up complaints, the damage stays with a sending domain that matches the brand, not the domain the client's invoices and staff email come from. Spreading volume across several of those domains means one bad week doesn't sink the next campaign.
Two more pieces make the first demo campaign look good. The AI designer builds the HTML email from a brief and a brand preset. Then the AI reviewer checks the subject line, structure, language, links, alignment with the brief and basic compliance before launch. A broken link or a missing unsubscribe gets caught before the client's first report, not discovered in it.
Where the portal is weaker in a live pitch
Four things will come up in front of an agency owner. None of them breaks the pitch. Each one needs a prepared answer, and you'll be more believable if you raise them before the prospect does.
A fresh account has no history to show
Yes, you can demo the portal before the agency has any campaign history. But an empty report looks thin. You'll see branding, a designed email and the segment builder, while the charts that persuade have nothing to plot. The fix is to prepare. A week before your call, send two or three real campaigns from your demo account to a small opted-in list, your own newsletter subscribers for example. Then the portal has real human opens, clicks and a segment or two to show. If you can't do that, say so plainly and show the designer and the reviewer instead, since they work on day one.
Lower open figures look like a drop
We covered why filtered opens come out lower. In a pitch the risk is that the agency owner pictures their most nervous client seeing the new figure. Give them the sentence they'll use. Something like "Your old reports counted the mail filters that scan every email, and these count people." Then point at clicks, which tell the same story whichever tool is counting.
Bookings only appear when booking is part of the campaign
The bookings row is the most persuasive part of the report, and it's empty for any campaign without a booking step. A newsletter or a plain announcement shows opens and clicks. For a clinic or a trade business that takes appointments, that's no problem. For a client who sells through a shop counter, the agency still has to connect clicks to sales some other way.
It reports email, not the whole retainer
The portal reports email results. It doesn't pull in paid ads, search rankings or social figures. An agency that sells a multi-channel retainer will keep its wider monthly report. The portal becomes the email section of that report, and the section the client can log into between calls.
Price and plans: one flat partner fee, client prices set by the agency
The model is simple to explain, and that helps in a pitch. The agency pays SendTo a single flat partner fee for wholesale access to the whole platform. That covers the branded portal, AI production, billing and the automated deliverability tools. The agency then sets its own monthly subscription price for each client. Clients buy their own sending usage on top of that subscription. So the agency's margin is whatever gap it chooses between its client prices and its flat fee. Prices change, so send prospects to the current SendTo pricing instead of quoting a number in your content.
For an agency owner, the flat fee is the point. Their cost doesn't rise every time a client sends more, because the client pays for their own usage. We've set out how this compares with metered models in flat fee white-label software vs usage based affiliate programmes.
What you earn as an affiliate
Here are the affiliate terms exactly as SendTo sets them. You earn 20% of the partner subscription each agency you refer pays SendTo, every month the agency pays it. You never earn a share of what that agency's own clients pay the agency. Attribution lasts 90 days from the first click, and the first touch wins. Commission is paid monthly, by PayPal. For the full walk-through of the programme, read our review of the SendTo affiliate programme.
Show it to retainer agencies, and lead with something else for price shoppers
Lead with the portal when you're talking to agencies whose clients pay every month and ask every month what they got. That means agencies on monthly retainers, consultants with advisory clients they want to move onto recurring platform revenue, and creators whose audience runs small client books. For these buyers the portal answers the question that decides renewals. The filtered opens, the bookings and the segments give them next month's plan, all under their own name.
It's a poor opening for two other kinds of buyer. The first is an agency that buys on cheapest cost per send. They're comparing unit prices, and a branded portal reads to them as overhead they didn't ask for. The second is a business that only wants an SMTP relay, or has decided to run its own mail server. They want a pipe for messages, not a client-facing product, and showing them a portal wastes the call.
For price shoppers, lead with deliverability and list cleaning. Show verification before sending, domain warmup and volume spread across sending domains, because those protect inbox placement better than a cheaper send does. If someone truly only needs transactional SMTP for their own app, tell them a plain sending service fits better and move on. They'll remember that you were straight with them.
Verdict
SendTo's client portal is the most persuasive screen in the platform for agency buyers. It turns sending into proof a client accepts. Human opens with scanner noise taken out, clicks, bookings and ready-made segments arrive in a portal that carries the agency's brand, and the partner view lets the owner see every client on one screen. The weak spots are real. Open figures run lower and need a sentence of explanation, a new account needs a few campaigns before the charts fill in, bookings need a booking step, and the reporting covers email only. Prepare for all four and none of them costs you the pitch.
Timing helps right now. Interest in email marketing peaks in January, and this is the week of 24 January 2026, when agency owners are setting their client plans for the year. If you know retainer agencies, this is a good week to open the portal for them.
Refer agencies to SendTo and earn 20% of the partner subscription each one pays, every month they pay it.
Join the SendTo affiliate programme


