Affiliate marketing tips

How to Host Live Webinars That Sell White Label Platforms to Agencies

Build a 50-minute webinar around three live SendTo demo moments, a rehearsed demo client and one tracked link, so the replay keeps selling to agencies.

Man drawing an email workflow diagram on a whiteboard
Photo by Campaign_Creators

Agency owners don't sign up for a white label platform because a slide listed its features. They sign up after they watch a client get set up and a campaign go out under an agency's own brand, live, in less time than the webinar takes. That's the argument of this guide. Build your hour around three or four live moments your audience could repeat on their own first client call, then end on one tracked link.

Run that way, webinars for SaaS affiliate marketing turn into a recorded demo that keeps selling after the live session ends. A talk that only describes the product stops selling the minute you press end. The demo version keeps working in the replay, in the follow-up emails and in every clip you cut from it.

We're SendTo, so the demo here runs on our platform. You'll get eight steps, each with the action, what you should see when it's right and the mistake that sinks it. We'll also be plain about what you earn as an affiliate and what you don't.

By the end you will have a live demo webinar that ends on one tracked signup link

Here's what you're building. A 45 to 60 minute live session with one rehearsed demo client inside it. A replay you can send, embed and clip for months. And a short follow-up sequence that sends each attendee one next step based on what they did. Every piece points at the same tracked SendTo link, so any agency that signs up through it is credited to you.

Get these in place before you pick a date. None of them takes long, but missing one on the day is how a good session goes sideways.

  • Your SendTo affiliate link, from the affiliate programme dashboard.
  • Access to a SendTo platform account you're allowed to demo from.
  • One demo client scenario you can say in a single sentence.
  • A webinar tool of your choice that records the session and shows links in chat.
  • A small list or community to invite, even a few hundred people.
  • Two rehearsal slots in your diary before the live date.
  • A way to email registrants afterwards, split by what they did.

Step 1: Pick one agency type and one client before you write anything

Choose one audience and one client. That's the whole action, and it decides everything else. A good audience is narrow enough to name, for example retainer agencies that run marketing for local trades like plumbers, electricians and roofers. Then write one believable client brief that agency would actually get.

Something like this. "A family plumbing firm with 1,200 past customers wants an autumn boiler service reminder that books jobs before the cold snap." That's your scenario. Every demo moment in the hour serves that one client. Your attendees picture their own plumber, their own roofer, and that's the point.

What you should see is a sentence you can say out loud in under ten seconds without notes. If you need a second sentence to explain who it's for, the audience is still too broad. If you're unsure which agencies to pick, start with the ones already looking for tools, and our guide on how to target agency owners searching for client marketing tools shows where to find them.

The mistake here is the webinar "for all agencies". It sounds bigger. It demos nothing specific. You end up showing a blank editor and generic copy, and nobody in the room can see their own client in it. One trade, one client, one campaign beats a tour of everything the platform does.

Step 2: Build the demo client before the day and keep a clean copy

Set up your demo client in full before anyone registers. That means the client brief from Step 1, a brand preset with the plumbing firm's logo, colours and tone, a small test list and a signup form. Then save a clean starting state you can return to after every rehearsal, either as a duplicate demo client or as a written checklist of what to delete.

The test list matters more than it looks. Use addresses you control or that people have agreed to receive test sends on: your own inboxes, a colleague's, a couple of seed accounts on different mail providers. Ten to twenty addresses is plenty. Build the signup form too, because it's a quiet selling point. SendTo forms are protected against bots and can use optional double opt-in, embedded on a site or hosted on a landing page. Agencies care about this, since one bot-filled list can wreck a new client's sending reputation in a week.

What you should see when you log in is a client portal that looks like an agency's own product. The agency's name, the agency's colours, the client's brand inside it. Spend five minutes on this. When attendees see a portal they could hand to a client tomorrow, they stop asking whether white label means "our logo in the corner".

What to prepare versus what to build live

The rule is simple. Anything slow, fiddly or forgettable gets done in advance. Anything that shows the platform doing work gets done live, because that's what the audience came to see.

  • Prepare in advance: logins, the consented test list, brand assets and preset, the written client brief, the signup form.
  • Build live: the email design from the brief, the AI review, the audience segment, the send settings.

If you're asking what to pre-record, the answer is a backup clip of each live block, not the blocks themselves. We'll cover that in Step 6.

Step 3: Script the hour around three live moments, not thirty slides

Plan the hour as three demo moments with a little framing on either side. Each one answers a question the agency's own client will ask them, so attendees leave knowing what to say on their next call.

Moment 1 is the brief turned into a designed email. Paste the plumbing firm's brief into SendTo, pick the brand preset, and the platform builds a designed HTML email in seconds. Then hit remix once to show a second version. This is the moment agencies remember, because it's the thing they'd show a prospect in the first few minutes of a call. Our piece on how to pitch finished email campaign designs on initial client calls goes deeper on why that lands.

Moment 2 is the review before launch. Run the built-in AI reviewer on the same email. It checks the subject line, structure, language, links, alignment with the brief and basic compliance. Read one of its flags out and fix it live. The client question this answers is "who checks this before it goes out?"

Moment 3 is the safeguards the agency doesn't have to build. Show that addresses are verified before sending, that new sending domains get automated warmup, and that campaign volume is spread across several brand-matched sending domains so no single domain carries the whole send. Finish on the reports, which exclude security scanner opens so the client sees real human opens and clicks. The client question here is "will it land in the inbox, and are the numbers real?"

What you should see on your script is three blocks, each with a client question at the top and a single action in the middle. The mistake is thirty slides of features with a two-minute demo tacked on at the end. Slides describe. Demos prove. If a slide doesn't set up a live moment, cut it.

A sample 50 minute run sheet

How long should it be? Aim for 50 minutes. That's long enough for three real demos and an honest Q&A, and short enough that people book it into a working day. Here's a run sheet you can copy.

MinutesBlockWhat happens
0 to 5FramingName the audience, read the one-sentence client scenario, say what they'll see built
5 to 13Moment 1Brief to designed HTML email, one-click remix
13 to 21Moment 2AI reviewer checks, fix one flag live
21 to 29Moment 3Verification, warmup, multi-domain sending, human-only reports
29 to 39Business modelFlat partner subscription, agency sets client prices, clients buy usage, affiliate disclosure
39 to 49Q&ATake real questions, answer the money ones directly
49 to 50CloseOne tracked link on screen and in chat

Put your affiliate link in five places before you share the registration page. On the registration page itself. In the confirmation email. Pinned in the chat during the session. On the closing screen. In the replay description and every follow-up email. Same link, every time.

Here's why the early placements matter. SendTo attribution lasts 90 days from the first click, and the first touch wins. When someone clicks your link on the registration page in September, your 90 days start then. If they sign up as an agency partner seven weeks later after watching the replay twice, they're still credited to you. That's how attendees who sign up later get counted.

The flip side is real and you should know it going in. If an attendee already clicked another affiliate's SendTo link within the last 90 days, that earlier click keeps the credit, however good your webinar was. You can't override it. What you can do is be the first link they meet, which means getting it in front of them at registration rather than saving it for the close. If you want the wider picture on how terms like this shape your earnings, see our breakdown of SaaS affiliate programme terms creators should check.

What you should see is a quick test that works. Open your registration page in a private browser window, click the link, and check it lands on SendTo with your tracking intact. Do the same from the confirmation email.

Step 5: Fill the room where webinars for SaaS affiliate marketing actually reach agency owners

Start with the people who already trust you. That's your own email list first, then the consultant and agency communities you're active in, then partner newsletters where an editor will mention your session to their readers. Begin two to three weeks before the date. One invite and one reminder isn't enough. Send the invite, then a reminder a week out, another the day before and a last one an hour before you go live.

Every invite names the trade and the client. "Watch a plumbing firm's autumn reminder get built, checked and sent under an agency's own brand, live, in 50 minutes" tells an agency owner exactly what they'll get. "Join our white label webinar" doesn't. If you're posting in communities, read their rules on promotion before you share anything. Our guide on how to pitch white label platforms to consultant communities covers how to do it without getting removed.

Timing matters too. Public interest in email marketing is lowest in June and peaks in November, December and January. As of August 2025, that makes September or October the right window. Agencies plan their busy season then. A session that shows them a client campaign they could sell before Black Friday reaches them while they're still deciding what to offer.

What you should see is a steady trickle of registrations after each reminder, plus registrants clicking your tracked link from the registration page. The mistake is sending one big blast to a cold list and hoping. A hundred registrants from your own community beat a thousand strangers who never open the confirmation email.

Step 6: Run the demo live with a fallback ready for every moment

Rehearse the full hour twice, start to finish, with a timer running. Do the first run a week out so you have time to fix what breaks, and the second the day before. After each rehearsal, reset the demo client to the clean copy you saved in Step 2. The live session should start from the same blank state your audience would.

During the first rehearsal, record each of the three demo blocks as a separate clip. Those clips are your fallback. If your connection drops halfway through Moment 2, don't spend three minutes apologising and reloading. Say "let me show you the one I ran earlier", play the clip and keep talking over it. The room barely notices. Without a clip, a frozen screen loses people, and they don't come back for the close.

Narrate as the agency, not as the software. While the email builds, say what the agency would say to its plumbing client: "Here's your autumn reminder, in your colours, ready for you to check." When the reviewer flags a subject line, say "Before anything goes out, it gets checked, and here's what it caught." Attendees learn the words for their own first client call while they watch the clicks. That's why a demo sells when slides don't.

What you should see is each moment finishing inside its eight minutes on the run sheet. If a block runs to twelve minutes in rehearsal, cut a click rather than talking faster. The mistake is skipping the backup clips because the rehearsal went fine. Rehearsals usually go fine, and the live session is when the wifi drops. The same clips are raw material for later too. Our guide to video walkthroughs that sell white label software shows how to turn them into standalone pieces.

Step 7: Answer the money questions honestly, theirs and yours

Explain the model in plain words, with no prices on screen. Agencies pay SendTo a flat partner subscription. They sell the platform to their own clients under their own brand, at prices they set. Their clients buy their own usage on top. So the agency decides its margin, and the client portal, billing and sending all carry the agency's name.

Can you show pricing on the webinar? Don't. Prices change, and people will still be watching your replay months from now. Say "current plans are on the pricing page" and drop the pricing page in chat. The recording stays accurate, and people go to the right place to make their decision.

Then disclose your side once, clearly, before the Q&A. Something like this. "I'm a SendTo affiliate. If you sign up as an agency partner through my link, I earn 20% of the partner subscription you pay SendTo, every month you pay it. I don't earn anything from what your clients pay you. That's yours." It takes thirty seconds and it doesn't kill the pitch. Plenty of the room will already be wondering what's in it for you, and saying it plainly shows you're not hiding anything.

Know the rest of the terms so you can answer follow-up questions directly. Attribution lasts 90 days from the first click, and the first touch wins. Commission is paid monthly, by PayPal. That's the full list. Don't add bonuses, tiers or guesses about what anyone will earn, because none of those exist.

What you should see is questions about margins and client pricing in the Q&A, which means people are working out their own numbers. The mistake is rushing the money section or leaving the disclosure to the very end, where it sounds like an afterthought.

Step 8: Follow up within 24 hours, split by what attendees did

Send the replay within 24 hours, with your tracked link in it. Don't send everyone the same email, though. Split your registrants three ways by what they did, and give each group one short email with one next step.

  • Attended and clicked: they've seen the platform. Send the replay, the tracked link and one line on what happens after signup.
  • Attended but didn't click: send the clip of Moment 1 and a single question, for example which client they'd try it on first, with the link underneath.
  • Registered but didn't attend: send the full replay with the minute marks for each demo block, so they can jump straight to the part they care about.

SendTo uses the same logic inside the platform, where agencies segment audiences into people who clicked, people who opened without clicking and people who didn't open. Your follow-up shows the method in action. To set those splits up properly, see our guide on audience segments based on campaign interaction history.

The replay keeps working after the first week. Embed it on a page on your site, cut each demo block into a short clip and link them in your newsletter during the November to January peak. Every copy carries the same tracked link.

What you should see is three short emails scheduled by the morning after the session. The mistake is one generic "thanks for coming" email to everyone. People who missed the session get thanked for coming anyway, and people who clicked get no reason to come back.

How to check it worked, and what to change if it did not

Agency signups don't all arrive on the night. An agency owner might watch, talk it over with a business partner, rewatch the replay and sign up five weeks later. So don't judge the session in the first 48 hours. Check these measures in this order.

  1. Registration to attendance rate, from your webinar tool.
  2. The minute attendees dropped off, from the attendance report.
  3. Link clicks during the session, then link clicks from the replay and follow-ups.
  4. Referred agencies shown in your SendTo affiliate dashboard across the full 90 day window.

When a number looks wrong, it tells you where to look. Low attendance means the invite or the timing. Rewrite the invite around the trade and the client, and check you didn't land on a bank holiday or during the school run. A sharp drop-off during a demo block means that block runs too long, so cut it to one action and one result. Lots of clicks with no signups means the money section left people unsure. Make the model clearer and point to the pricing page earlier. Good attendance with few clicks means people didn't see the link enough. Pin it in chat from minute one and leave it on the closing screen longer.

Change one thing per session, run it again and compare. By the third run you'll have a demo you can repeat whenever you like and a replay that keeps selling between sessions. When you're ready to start, join the programme, get your tracked link and put it on your registration page before you send a single invite.

Get your tracked link and earn 20% of the partner subscription of every agency you refer, every month it pays.

Join the SendTo affiliate programme

Frequently asked questions

Do I need my own SendTo account to run the live demo?

Don't assume your affiliate link comes with a demo account. Ask the SendTo affiliate team how demo access works before you set a date. If you already work with an agency on SendTo, you can co-host from their account with their written agreement, using a demo client set up just for the session.

How long should a webinar selling software to agencies run?

Aim for 50 minutes. That fits three real demo moments and an honest Q&A. It's also short enough that agency owners will book it into a working day.

Which parts should I demo live and which should I pre-record?

Do the email design from the brief, the AI review, the segment and the send settings live. Set up logins, the consented test list, the brand preset, the brief and the signup form in advance. The only thing you pre-record is a backup clip of each live block, in case one breaks.

Will attendees who sign up weeks later still be credited to me?

Yes, if your tracked link is the first one they click. SendTo attribution lasts 90 days from the first click. Someone who clicks on your registration page in September and signs up seven weeks later after watching the replay is still yours.

What if an attendee already clicked another affiliate's SendTo link?

Then the earlier click keeps the credit. The first touch wins, and you can't override it, however good your webinar was. Your only move is to be the first link they meet, so put yours on the registration page and not only at the close.

What do I earn when an agency signs up through my link?

You earn 20% of the partner subscription that agency pays SendTo, every month it pays. Commission is paid monthly by PayPal. You never get a share of what the agency's own clients pay the agency.

Should I show prices during the webinar?

Explain the model instead: a flat partner subscription, agencies set their own client prices and clients buy their own usage. Don't quote plan figures. Prices change, but your replay won't, so send viewers to the SendTo pricing page for current numbers.

What should I do with the replay afterwards?

Send it to registrants, embed it on your site and cut clips from it, all carrying the same tracked link. A demo replay keeps selling for months because viewers watch a real campaign get built instead of slides describing one.

Earn 20% of what every partner you refer pays, every month.

Refer agencies, studios, consultants and resellers to SendTo. Your commission is 20% of the platform fee each partner pays, for as long as they pay it.

90-day attribution · Paid monthly by PayPal