Email marketing

SendTo Signup Forms Review: Bot Protection, Hosted Pages and Double Opt-In Judged

SendTo's signup forms judged from client use: bot protection on every form, optional double opt-in, hosted pages for unfinished sites, and plain design.

Coffee shop counter menu board and glass case with pastries
Photo by Pexels

SendTo's signup forms are quiet, dependable and a little plain to look at. They suit agencies building consented email lists for small business clients, and they'll disappoint anyone who wants the form itself to impress. We've built them for a cafe, a salon and a trades business over the past few months. Every one of those lists is cleaner than the one it replaced.

The argument of this piece is simple. These forms are a list-quality tool first and a design tool second. Bot protection runs on every form. Double opt-in is there when a client needs it. Every signup goes through the same checks as the rest of the platform. That removes the three usual reasons a list goes bad: fake signups, people who never agreed to hear from the client, and addresses that bounce.

It's Monday 17 June 2024. Engagement is in its summer dip, and the agencies we talk to are using the quiet weeks to build lists ahead of the Q4 rush. Below you'll find what setup takes, how the bot protection behaves, when to switch on double opt-in, and when a hosted page beats an embed. Later sections cover the design limits plainly.

SendTo's signup forms protect list quality first and leave design second

SendTo's signup forms do one job very well, and that's keeping junk off a client's list. Living with them is uneventful in the best sense. You build a form, it collects real people, and you don't spend Monday mornings deleting nonsense addresses. That makes them a strong fit for agencies running marketing emails for local businesses, where a clean, consented list matters more than a clever layout.

This sendto signup forms review takes a clear stance. If you judge a form by what lands on the list, these forms are excellent. If you judge it by how far you can push its looks, they're ordinary. The forms follow a client's brand presets and a clean standard layout, and that's where the styling stops. We'll come back to what that rules out. For now, hold on to the trade. You give up design freedom and get a list you can send to without worry.

Setting up a form takes minutes because it borrows the client's brand presets

Our first build was for Marta, who runs a neighbourhood cafe and wanted a newsletter signup for her weekend specials. The process has four decisions. You pick the list the signups go to, choose the fields, apply her brand preset, then pick embedded or hosted. We asked for first name and email only. The preset pulled in her colours, logo and fonts, so the form looked like hers before we touched anything. The whole thing took under ten minutes, including a test signup from a phone.

Two things took a second look. The first was the confirmation message after submit, which defaults to generic wording. Rewrite it in the client's voice, because it's the first thing a new subscriber reads. The second was double opt-in, which is off until you switch it on. That's the right default for some clients and the wrong one for others, so make the call on purpose.

Compare that with the usual agency stack. You'd have a standalone form builder, a connector to pass submissions along, and a separate email tool. That's three logins, two hand-offs where data breaks, and field mapping to keep in sync whenever someone renames a field. Add a challenge plugin on the website and you have four moving parts per client. With SendTo, the form, the list and the sending live in one place, so there's nothing to connect.

Bot protection works without the client ever noticing it, which is the point

Every SendTo form carries bot protection, embedded or hosted, with nothing to switch on. Scripted and fake submissions are stopped before they reach the list. Real visitors don't see a puzzle, don't tick a box and don't pick out traffic lights. They type their email and press the button. That's the whole experience, and it's why clients never ask about it.

Priya's salon showed us what that's worth. Her old signup sat on a native website form with no protection. In May it collected 412 signups, and when we went through them, 131 were junk. There were random strings at disposable domains, the same address in twenty variations, and a run of signups at 3am. Her first send to that list bounced at 6.8%. We moved her to an embedded SendTo form on the same page. Over the next three weeks she got 188 signups, junk dropped to a handful the checks caught, and her first send to the new subscribers bounced at 0.9%.

Junk matters more than it looks. Bot signups bounce, and bounces tell mailbox providers the sender doesn't look after its list. Some scripted signups also use real people's addresses. Those people then get marketing emails they never asked for, and they press the spam button. A few hundred junk addresses can drag down a small client's sending reputation before their first real campaign.

The usual fix is a challenge plugin bolted onto the website form. It works, but real visitors face puzzles, some give up, and every client site needs its own plugin, keys and updates. If you manage twelve client sites, that's twelve setups to maintain. We've written separately about how to protect client lead capture forms from bot submissions before site launch. With SendTo forms, the protection travels with the form, so there's nothing per site to look after.

Optional double opt-in is the right choice for GDPR-minded clients, and it costs some signups

Switch on double opt-in for a form and the subscriber gets a confirmation email after they submit. They join the list only when they click the link inside it. Until then, they get nothing else. The confirmation carries the client's brand, so it reads as coming from the cafe or salon, not from a system they've never heard of.

It costs signups, and you should tell the client so up front. Across our client forms, between one in five and one in four people never click the confirmation. Some miss it, some find it in a promotions tab days later, and some simply change their mind. What's left is a list of people who actively said yes twice, and they open and click more than the single opt-in crowd.

On GDPR, double opt-in gives you a record that the owner of the address confirmed the signup, which is strong evidence when someone asks how they got on a list. It doesn't make consent valid on its own. The form still needs clear wording about what people are signing up for. We compare the two methods in full in single opt-in versus double opt-in.

Single opt-in is still a fair choice in some cases. Signups taken in person, on a tablet at the counter, already come with a face and a conversation. Warm audiences where consent is recorded another way, such as a booking form with a ticked consent box, don't need a second step either. Since bot protection and verification run on every form, single opt-in on SendTo carries less risk than single opt-in on an unprotected site form.

When to switch it on per client

Our rule of thumb sorts clients by who's signing up and where they're coming from.

  • European audiences: switch it on, because GDPR questions come up and a confirmation record answers them.
  • Regulated trades such as finance, health or legal services: switch it on, since a complaint costs these clients far more than a lost signup.
  • Cold traffic from paid ads: switch it on, because strangers mistype, sign up on impulse and forget.
  • In-person or warm audiences with consent recorded elsewhere: single opt-in is fine.

Hosted landing pages fix the problem of a client site that isn't ready

Dean, an electrician we work with, had a website in development for two months. His van, invoices and quote PDFs all carried a web address that led nowhere useful. We gave him a hosted SendTo signup page instead and printed that link and a QR code. He collected 74 consented signups before his site went live, and they got his launch email on day one.

Hosted pages also answer a question we hear often. Can you collect signups securely before a client's site has a working certificate? Yes. The hosted page sits on a secure connection SendTo already handles, so visitors see the padlock and their address travels encrypted. You don't have to wait for the site build, the hosting move or a certificate renewal.

Embedding fits when the client has a live site, served securely, and somewhere you can paste a code snippet, like a footer, a sidebar or a contact page. Check the site builder accepts custom code on the client's plan before you promise anything. Hosting fits when there's no site, a site in progress, or the signup belongs on a flyer, social profile or receipt instead of a web page. Plenty of clients end up with both, the embed on the site and a hosted page for everything printed.

Every signup goes through the same verification, suppression and segmenting as the rest of the platform

Pressing submit isn't the end of the process. The address gets checked before it counts as a usable contact, so typos like gmial.com and dead mailboxes are flagged before your first send. That matters most in the first month of a new list, when one bad batch hurts a small client's sender reputation the most. We cover why this step pays off in automated email list verification. The short version is that every send goes out to fewer bad addresses.

Suppression applies too, and it applies across the whole platform. Say someone unsubscribed from Marta's cafe emails in March and signs up again through an old link in June. They don't quietly land back on the list. The same goes for addresses that hard bounced or were blocked. With the old setup of a form builder plus a connector, this was the gap we worried about most, because a connector passes on whatever it receives and doesn't check who opted out.

Once subscribers start getting campaigns, you can segment them by what they did. You can build a segment of people who clicked, people who opened without clicking, or people who never opened. For Marta, that meant a second weekend-specials email went only to the people who opened the first one and didn't click. That's a small move, and it's the sort of thing a client notices.

The first numbers are believable, too. Client portal reports leave out opens triggered by security scanners, so a new list doesn't show a fake 70% open rate in its first week. Priya's first send to her new subscribers showed a 41% human open rate, and that's a number she can plan around. We look at the reporting side more closely in our SendTo client portal review.

Where this SendTo signup forms review found the limits: design flexibility

The forms are plain, and we're saying that up front. Every form follows the client's brand preset, with their colours, logo and fonts, on a clean standard layout. You choose the fields and the wording. You can't move elements around freely, set exact spacing or rebuild the layout from scratch. Our verdict on design in this sendto signup forms review is that it's tidy and on brand, and it stops there.

These forms are not a full form builder. There are no multi-step forms, no conditional logic that shows a field depending on an earlier answer, no quizzes, no scoring and no payment fields. Dean wanted a quote request form that asked about the job type and then showed different questions for rewiring and for fault finding. SendTo couldn't do it. We built that form in a separate tool and kept the SendTo form for newsletter signups only.

Close-up of a thumb typing on a smartphone held over a park bench in daylight
Photo by Campaign_Creators

There are two workarounds, and both have limits. A hosted landing page gives you more room around the form for headlines, images and copy that sell the signup, so the page carries the design and the form stays simple. An embed sits inside the client's own site, so the page around it supplies the look and the form just needs to fit in. Neither one changes what the form itself does. If the job needs logic, branching or taking money, no workaround inside SendTo gets you there.

Standalone form builders are the opposite trade. They give you every layout, logic and payment option you could ask for. What you give up is everything from the earlier sections. You have to connect them to an email tool, add bot protection site by site, and accept that submissions arrive with no verification or suppression on the way in. For a newsletter signup, that's a bad trade. For an application form, it's the right one.

Forms come with the platform, so cost depends on the partner plan, not a per-form fee

There's no separate charge for forms. Signup forms and hosted landing pages are part of the complete white-label platform that agencies run under their own brand, along with campaigns, websites, sequences and list cleaning. You set what your clients pay for it. Clients buy their own usage on top of the monthly subscription you set, so a busy client's sending doesn't eat into your margin.

Compare that with the stack we used before. Each client needed a form tool, a page tool and an email tool, every one billed on its own and usually priced by seat, by form or by submission. Adding a client meant three more subscriptions to set up and three more to cancel when they left. With forms built into the platform, a new client's signup form is one more thing on a plan you already pay for.

Prices change, so we don't quote them here. The current partner plans are on the pricing page. For everything the platform covers apart from forms, read our full SendTo review.

Who should use SendTo's signup forms and who should look elsewhere

These forms suit agencies and freelance marketers building email lists for small businesses like cafes, salons, trades, shops and studios. They suit clients who ask about GDPR and want a consent record they can point to. They also suit anyone who's spent a morning deleting bot signups by hand and doesn't want to do it again. The bigger your client list gets, the more it helps, because nothing has to be set up again on each client's site.

In three cases you should look elsewhere, and in each one a different kind of tool does the job better.

  • The form is the product. Quizzes, job applications, booking requests with branching questions or lead scoring need a dedicated form builder with conditional logic and scoring.
  • The design has to match a bespoke site exactly. A native website form built by the site's developer, with a challenge plugin added, gives you full control over every pixel.
  • The client runs a separate email system they won't leave. If they're staying, use the signup forms that system already has, because a form that feeds a list you can't send from just creates an export job.

A split setup works for plenty of clients. Dean uses a separate form builder for quote requests and SendTo for his newsletter. Each tool does the job it's good at, and the newsletter list stays clean.

Verdict

SendTo's signup forms are very good at keeping lists clean and consented. Every form has bot protection, embedded or hosted. Double opt-in is there for the clients who need it. Every signup goes through the same verification and suppression as the rest of the platform. Setup takes about ten minutes. The forms look plain, and they can't do multi-step forms, conditional logic, quizzes or payments.

For a small business client, the list matters more than the design. Priya's bounce rate fell from 6.8% to 0.9%, and that did more for her marketing emails than any layout could. A plain form that only lets real people through is worth more to a cafe or salon than a striking form that also collects bots. If the client needs the form to be the product, use a dedicated builder and don't regret it.

If you advise agencies or write about the software they use, you can recommend SendTo and earn from it. Affiliates earn 20% of the partner subscription of every agency they refer, every month that agency pays it. That's never a share of what the agency's own customers pay. Attribution lasts 90 days from the first click, the first touch wins, and commission is paid monthly by PayPal.

Refer agencies that build consented lists for small businesses, and earn 20% of each one's partner subscription every month it pays.

Join the SendTo affiliate programme

Frequently asked questions

Do SendTo's forms really stop bot signups, and will real visitors notice?

Yes, they stop them, and no, visitors won't notice. Priya's salon went from a 6.8% bounce rate to 0.9% after we swapped her unprotected site form for a SendTo one, and nobody had to solve a puzzle or tick a box. The protection only covers SendTo's own forms, so signups imported from an old site form skip it.

Should I turn on double opt-in for every client?

No. Between one in five and one in four people never click the confirmation link. Switch it on for European audiences, regulated trades and cold traffic from paid ads. Single opt-in is fine for signups taken in person or where consent is already recorded somewhere else.

Does double opt-in prove GDPR consent?

It gives you a record that the address owner confirmed the signup. That's strong evidence if someone asks how they got on the list. It doesn't make consent valid on its own, though. Your form still needs clear wording about what people are signing up for.

Can I collect signups before a client's website is live or has a secure certificate?

Yes. Use a hosted SendTo signup page. It runs on a secure connection that SendTo already handles. Dean, an electrician, collected 74 consented signups through a hosted link and a QR code while his site was still being built.

What happens to an address after someone submits the form?

It's verified before it counts as a usable contact, so typos like gmial.com and dead mailboxes get flagged before your first send. After that it goes through the same suppression and segmenting as every other contact on the platform.

How much can I change a form's design?

Not much, and that's the real trade-off. Forms take the client's brand preset (colours, logo and fonts) on a clean standard layout, and the styling stops there. If the form itself has to impress, you'll be better off with a dedicated form builder.

Do signup forms cost extra on top of the platform?

No. There's no per-form fee because forms come with the platform, so your partner plan sets the cost. Check the SendTo pricing page for current plans.

Can I earn by recommending SendTo to agencies?

Yes. Join the SendTo affiliate programme and you'll earn 20% of the partner subscription each agency you refer pays, every month they pay it. Attribution lasts 90 days from the first click, the first touch wins, and commission is paid monthly by PayPal.

Everything this blog teaches, on a platform with your name on it.

Email campaigns, websites, landing pages and print for your clients, made from a short brief and sent under your brand. Create your account and look around with a sample workspace loaded.

No contract · Cancel any time · Explore everything before you pay